duplicating antique finish
john lucas
I am trying to restore a 115 year old Grandfather clock for a friend who does clock repair. It was hell carving this small moulding but I finally got it right and now trying to match the finish. I've got the color right and when I put some orange shellac on it will probably be dead on. The advice I need from you all is how to build up the dark parts that appear to be built up dark wax that fills in the corners and deep crevices. I've gotten just plain lucky on other clocks I've done for him over years but this one is quite valuable and I need to get it dead on not just close. Can I color wax and then coat it with shellac or is there some mixture I can make up. I have pumice and rottenstone that I've thought about mixing with some stain. I have quite a few places on this clock that will need that sort of fill to help match the original finish. I did my best to convince him that it should be left totally alone but he's convinced I can do the job and he gave me a 16/32 thickness sander that he wasn't using so I feel kind of indebted to him and can't turn the job down. Not to mention I need the money. Here is a photo. The piece I'm holding with my thumb is my carving. 



