Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Couldn't find my 3M rubber sanding block,

Posts

Couldn't find my 3M rubber sanding block,

#1

Couldn't find my 3M rubber sanding block,

Keith Newton

I'm in the process of finishing some cabinet doors, and needing to sand between coats. Last time I needed a new pad for my 6" random-orbit sander, I bought two, so when I couldn't find the normal 1/4 sheet block, I remembered having the extra pad, which I put into use by drilling and tapping a wooden block that fits my hand to screw on top.

After using it through two coats, I have to say that it beats anything I've ever used. It has just the right density, is very light, and uses the same disk that I keep on hand for power sanding.

Next time you have any delicate sanding, even if you don't have an extra pad laying around, I would encourage you to remove the one from your sander, to just give it a test drive. I think you will like it.

Re: Couldn't find my 3M rubber sanding block,

#2

Just tested this

Denny

I used the pad off an old ROS I was saving for parts. It really works well.

Thanks!

Re: Couldn't find my 3M rubber sanding block,

#3

Re: Couldn't find my 3M rubber sanding block, *LINK*

Dick Coers

The Fulton sanding mouse also works well, $5.99 at Peachtree. You have to scroll down the page of the link. Personally I won't block sand between coats if I didn't block sand before starting the finishing. I just tri-fold the 320 and wipe it down.


http://www.ptreeusa.com/abrasive_accessories.htm