General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Jim Tusant 6/9/08, 6:52 PM
9 Replies · 31 ViewsLast post 6/10/08, 4:36 PM by Jim Tusant -
by Sawman 6/7/08, 12:59 PM
11 Replies · 31 ViewsLast post 6/10/08, 4:12 PM by Larry Clinton At Frankfort (Central)., Indiana -
Free Plane Refinishing and Sharping Class ATL, Ga.
by rarebear 6/9/08, 9:40 PM
2 Replies · 20 ViewsLast post 6/10/08, 1:19 PM by Yonak -
by Stephen Shepherd in the State of Deseret 6/10/08, 11:49 AM
0 Replies · 22 ViewsLast post 6/10/08, 11:49 AM by Stephen Shepherd in the State of Deseret -
OT - Terro Update... They LOVE it!
by Kenneth E. Bellock 6/6/08, 9:03 PM
13 Replies · 51 ViewsLast post 6/10/08, 4:42 AM by Glenn Madsen, SF Bay Area -
by Hal B. 6/10/08, 3:18 AM
1 Reply · 14 ViewsLast post 6/10/08, 4:33 AM by Larry Marker -
fence update for bosch 4000 table saw.
by mike neitzel-woodturner 6/10/08, 2:11 AM
0 Replies · 79 ViewsLast post 6/10/08, 2:11 AM by mike neitzel-woodturner -
by Randy Johnson 6/8/08, 2:01 PM
13 Replies · 21 ViewsLast post 6/10/08, 1:50 AM by Gary Evans Tallassee, TN -
by steve mackay 6/6/08, 8:33 PM
3 Replies · 19 ViewsLast post 6/9/08, 11:29 PM by ratts -
by John McCullough 6/9/08, 9:42 AM
1 Reply · 19 ViewsLast post 6/9/08, 10:26 PM by Michael Dresdner -
Finishing advice (religious theme warning)
by JL 6/9/08, 3:32 PM
7 Replies · 21 ViewsLast post 6/9/08, 10:22 PM by Michael Dresdner -
How to re-seal hand truck tires...
by Brint in Richmond 6/9/08, 6:01 PM
5 Replies · 23 ViewsLast post 6/9/08, 9:56 PM by Bill Tindall, E.TN -
by Robert Henderson 5/27/08, 4:08 PM
17 Replies · 87 ViewsLast post 6/9/08, 6:50 PM by J D Thomas -
by Larry in NW Ohio 6/9/08, 5:19 PM
4 Replies · 55 ViewsLast post 6/9/08, 6:46 PM by Larry Clinton At Frankfort (Central)., Indiana -
by Jay B. Tabor 6/9/08, 1:49 AM
5 Replies · 33 ViewsLast post 6/9/08, 6:24 PM by steve mackay -
What do I do with this block of wood?
by Mitch from Canada 6/8/08, 6:55 PM
3 Replies · 26 ViewsLast post 6/9/08, 3:50 PM by Clint Searl, at the base of Haycock Mtn -
My shop is finally coming along... *LINK*
by Brian Gray in Sandusky, OH 6/7/08, 5:35 PM
12 Replies · 29 ViewsLast post 6/9/08, 2:30 PM by Brian Gray in Sandusky, OH -
by Howard 6/6/08, 5:23 PM
8 Replies · 23 ViewsLast post 6/9/08, 12:50 PM by howard -
by David Yoho 6/9/08, 12:05 PM
0 Replies · 20 ViewsLast post 6/9/08, 12:05 PM by David Yoho -
by Ken Krawford 6/6/08, 1:06 PM
6 Replies · 35 ViewsLast post 6/9/08, 2:39 AM by Ken Krawford -
by Spencer 6/8/08, 9:40 PM
6 Replies · 14 ViewsLast post 6/9/08, 2:35 AM by Fred Davis -
by ernie miller 6/8/08, 11:20 PM
1 Reply · 14 ViewsLast post 6/9/08, 12:17 AM by Bart Goldberg -
Ask your contractor if he's licensed.
by Rod Peterson -- Ormond Beach 6/5/08, 5:41 PM
9 Replies · 35 ViewsLast post 6/8/08, 9:46 PM by Rick L------WebKitFormBoundaryKoqP3jEC+bOVNWd3 -
Wixey Degree Angle Guage--Left Tilt Saw
by George 6/5/08, 4:19 PM
17 Replies · 75 ViewsLast post 6/8/08, 7:52 PM by Jim DeLaney, Austintown, Ohio -
by Ned Bulken 6/6/08, 8:07 PM
5 Replies · 29 ViewsLast post 6/8/08, 6:33 PM by Ned Bulken -
by billfrommich 6/8/08, 12:30 PM
4 Replies · 20 ViewsLast post 6/8/08, 5:08 PM by Ed Mulligan -
Need help with old bandsaw part
by CJ McLaughlin 6/7/08, 11:56 AM
4 Replies · 17 ViewsLast post 6/8/08, 4:00 PM by CJ McLaughlin -
by Jeff H. 6/7/08, 1:45 AM
3 Replies · 67 ViewsLast post 6/8/08, 3:46 PM by wudwork -
by Don Evans 6/7/08, 1:40 PM
3 Replies · 10 ViewsLast post 6/8/08, 3:55 AM by Don Evans -
by john l. blue 6/7/08, 3:24 AM
3 Replies · 18 ViewsLast post 6/8/08, 3:36 AM by john l. blue



