Need help with old bandsaw part
CJ McLaughlin
>Hey guys:
I've been stumped by a missing thrust bearing on my old craftsman (king seely era) bandsaw. These bearings are not bearings in the true sense, but rather a 1" disc (with a relieved face) on a 1/4" shaft that spins freely in a 3/8" sleeve that can be fixed at a desired position by a set screw. The easiest way to imagine what this thing looks like is to imagine a very small engine valve.
At some point in the past, the saw was tipped for movement and the lower thrust bearing fell out. This obviously took place when the blade was not in place.
I ran up the design using the software provided by emachine shops and obtained a quote of $200 (with a minimum of 20 pieces). Considering that the saw only cost $115, I'm loathe to go this route.
To come to the point here, can anyone give me the name of a machine shop or hobbyist that would be willing to run off one or two of these things for a more reasonable price? These parts are too old to purchase from Sears.
CJ



