Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

What do I do with this block of wood?

Posts

What do I do with this block of wood?

#1

What do I do with this block of wood?

Mitch from Canada

>I have a cutting block...about 5.5 inches thick, 4 plus feet long and say 2.5 feet across. It wieghs a ton. I had thought about using it as a table top for a shop table but it would be very top heavy. I don't know what kind of wood it is. It is 2x6's glued together to make the block. The wood doesn't look like run of the mill two by fours, it's redish in color.

I'll try to post a picture, but right now, what could be done with this thing?

Thanks.

Mitch

Re: What do I do with this block of wood?

#2

Re: What do I do with this block of wood?

Fred Davis

>sounds like a piece piece of glu-Lam, which would be soft wood.

If you have a sawmill near you with a horizontal band mill like a WoodMizer , you could have it split in half length wise and double your surface area .

FredD

Re: What do I do with this block of wood?

#3

wonderful bench top

Bill Tindall, E.TN

>Make a frame and set it on it. A woodworking bench can't be too heavy.

Re: What do I do with this block of wood?

#4

Re: What do I do with this block of wood?

Clint Searl, at the base of Haycock Mtn

>The 30x48 size is too small for a bench top if you're going to go to the trouble of making a base. It's the base that provides stability. And the thickness is way more than necessary, by at least a factor of two. With the proper base, a workbench top never has to be more than 2 inches thick.

If the exposed grain is at all interesting, I could see it as a low slung coffee table set on some six inch diameter tree trunk legs with the bark left on, finished (legs) in a patinated copper or bronze.

Clint