Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

walking stick, raw

Posts

walking stick, raw

#1

walking stick, raw

Jay B. Tabor

>I have two nice large saplings that I recently cut down, about 1-1/2 to 2 inches in diameter. what makes them real nice is that I have a vine issue on the edges of my property and they have wound nicely around the wood providing great natural swirls.

My question is, do I take the bark off now, or wait. In sealing the ends, as I have seen mentioned elsewhere, what am I accomplishing by this? It has said to do it, I'm just curious as to why.

I like to be a little old school from time to time. When they are dry what might make a nice finish besides uerethane. Shellac, varnishes and the positives and negatives to heating them prior to application.

Thank you.

Re: walking stick, raw

#2

JL

Re: walking stick, raw

JL

>Sealing the ends controls the amount of moisture loss and prevents end-checks. Keeping the bark on for the time being will slow down the amount of moisture loss also. With too fast moisture loss, you get lots of splits (DAMHIKT).

Re: walking stick, raw

#3

Lee Grindinger

A bit more..,

Lee Grindinger

>Wood loses moisture nearly 13 times faster from end grain than face grain, this is why you seal the ends. All the moisture then leaves the wood at roughly the same speed.

I'd think a stick such as this would be ideal finished in an oil like tung or linseed rather than a film like urethane or another varnish.

Lee

Re: walking stick, raw

#4

Re: walking stick, raw

John Veerkamp, Western Mo.

>Slightly different Experience.

I strip the bark and finish my walking sticks immediate.t upon harvesting. Then I give several soaking coats on linsead oil over a couple of weeks time.

I find it much earier to remove the bark when it is still fresh. Plenty of linsead oil seems to slow drying and checking/spliting.

Just my experience.

John

Re: walking stick, raw

#5

Re: walking stick, raw

Don Orr

>I agree with John totally. Get the bark off now while it is easy or it will be a miserable job when it dries. Soak with BLO and drying evens out nicely.

Re: walking stick, raw

#6

Father In Law . . .

steve mackay

>cranks them out. He lets them sit for a day or two with the skin on. He says it loosens up the skin. He moves pretty fast from cutting to carving to finnishing so he doesn't seal the ends prior to final seal and finnishing.