General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Bill Tindall, E.TN. 2/10/16, 6:08 PM
8 Replies · 40 ViewsLast post 2/11/16, 2:41 PM by Bill Tindall, E.TN. -
by Derek Cohen (in Perth, Australia) 2/8/16, 2:02 PM
15 Replies · 56 ViewsLast post 2/11/16, 9:17 AM by TomD -
by Derek Cohen (in Perth, Australia) 2/10/16, 4:05 PM
1 Reply · 27 ViewsLast post 2/10/16, 9:04 PM by Dick Coers -
by Tom 2/8/16, 10:38 PM
11 Replies · 45 ViewsLast post 2/10/16, 8:58 PM by Thomas E Norton -
WC Weekend Accomplishments....
by Dennis E Peacock 2/8/16, 5:14 AM
5 Replies · 33 ViewsLast post 2/10/16, 3:33 PM by Don Orr -
by Joe 2/10/16, 1:54 PM
0 Replies · 33 ViewsLast post 2/10/16, 1:54 PM by Joe -
by Barry Irby 2/9/16, 1:17 AM
12 Replies · 56 ViewsLast post 2/10/16, 1:11 PM by Barry Irby -
A dandy screw driver from Lee Valley
by Bill Tindall, E.TN. 2/10/16, 1:38 AM
2 Replies · 32 ViewsLast post 2/10/16, 2:59 AM by Tom Dunlap -
What to measure to square a case?
by Bill Tindall, E.TN. 2/4/16, 9:53 PM
23 Replies · 76 ViewsLast post 2/9/16, 9:39 PM by Bill Tindall, E.TN. -
by Kevin French 2/9/16, 2:21 AM
1 Reply · 58 ViewsLast post 2/9/16, 3:04 PM by Don Orr -
Table saw top maintenance - couple of questions
by Terry Alexander 2/7/16, 12:19 AM
10 Replies · 59 ViewsLast post 2/9/16, 11:11 AM by TomD -
Working with MDF as Residential trim Questions
by Barry Irby 2/8/16, 2:10 PM
4 Replies · 85 ViewsLast post 2/8/16, 11:13 PM by Clifton C -
by Derek Cohen (in Perth, Australia) 2/8/16, 1:27 PM
6 Replies · 33 ViewsLast post 2/8/16, 4:24 PM by Derek Cohen (in Perth, Australia) -
Morris/Stickey style chair cushions
by Alan Young 2/5/16, 3:28 PM
8 Replies · 37 ViewsLast post 2/8/16, 1:57 PM by Alan Young -
What to do with abundant wood chips
by cameron 2/3/16, 2:59 PM
20 Replies · 73 ViewsLast post 2/7/16, 1:49 PM by Mark Mandell -
by Thomas E Norton 2/5/16, 7:24 PM
11 Replies · 52 ViewsLast post 2/7/16, 1:38 PM by Mark Mandell -
cheap slides from A&H Turf: quality?
by cameron 2/3/16, 2:18 PM
4 Replies · 37 ViewsLast post 2/7/16, 1:27 PM by fredhargis -
by TomD 1/30/16, 8:51 PM
8 Replies · 231 ViewsLast post 2/7/16, 2:59 AM by Kent B -
by Jack Guzman from Maine 2/6/16, 2:22 PM
2 Replies · 30 ViewsLast post 2/6/16, 4:09 PM by Hoa -
by Thomas Skaggs 2/3/16, 4:30 PM
10 Replies · 51 ViewsLast post 2/6/16, 3:36 AM by Dick Coers -
by joe mohnike 2/5/16, 5:03 PM
0 Replies · 44 ViewsLast post 2/5/16, 5:03 PM by joe mohnike -
by Mark Stone 1/29/16, 1:18 PM
5 Replies · 32 ViewsLast post 2/5/16, 3:40 PM by Mark Stone -
First Ever Guitar Build - Done
by Dennis E Peacock 2/2/16, 7:27 PM
15 Replies · 34 ViewsLast post 2/4/16, 3:40 PM by Don Orr -
by Don Stephan 2/1/16, 4:41 PM
14 Replies · 48 ViewsLast post 2/3/16, 3:30 PM by Grant in Iowa -
Actually finished a project! 2
by Jesse Cloud 1/29/16, 10:45 PM
26 Replies · 136 ViewsLast post 2/3/16, 11:57 AM by Doug Ridley -
by Brad Chenoweth 2/1/16, 5:43 PM
8 Replies · 33 ViewsLast post 2/3/16, 4:39 AM by Gary Smyth -
wood choice for drawer material
by cameron 2/1/16, 3:33 AM
13 Replies · 48 ViewsLast post 2/2/16, 5:39 AM by Derek Cohen (in Perth, Australia) -
WC Weekend Accomplishments....
by Dennis E Peacock 2/1/16, 4:26 AM
13 Replies · 47 ViewsLast post 2/2/16, 2:37 AM by Keith Newton -
A "good" design idea that wasn't
by Bill Tindall, E.TN. 1/30/16, 9:54 PM
3 Replies · 40 ViewsLast post 2/1/16, 2:38 PM by Sgian Dubh -
by Bill Tindall, E.TN. 1/24/16, 12:06 AM
9 Replies · 69 ViewsLast post 2/1/16, 12:03 AM by Charlie belden



