Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Bench Grinder Recommendations

Posts

Bench Grinder Recommendations

#1

Bench Grinder Recommendations

Thomas Skaggs, Foothills of Mount Level

My Delta variable speed bench grinder has run amok! This thing has given me trouble for years and I am convinced it wants to kill me!! It's a piece of junk and not worth getting fixed.

So I am looking for a good bench grinder. I sharpen my turning tools and other things with it. But also I do some metal grinding too.

Best speed? 1750? or 3400? 6" or 8"

Any models that you are happy with? Price is some object but in the end want dependable!

Thanks for any advice and input!

T.

Re: Bench Grinder Recommendations

#2

A novel approach- VFD and 3-phase

Bill Tindall, E.Tn.

this was easy for me because I already had a variable frequency drive on my lathe's 3 phase motor.

I bought a 3 phase 7" Baldor grinder and run it off the VFD. I have continuously variable speeds 0- 3600

I like the hollow a 7" makes in edged tools

Re: Bench Grinder Recommendations

#3

Jack Guzman from Maine

Re: Bench Grinder Recommendations

Jack Guzman from Maine

1725 is all you should ever need for sharpening and general use around the shop.If you find a need for a high speed grinder for buffing or something you don't want to be changing out stones when you want to use it anyhow. Get a dedicated grinder for such things.I have had all kinds of grinders over the years but the only one I use anymore is a 1725 that I bought from woodcraft or some other vendor 15 years ago. I got a blue norton cool running stone and a white semi-coarse aluminum oxide both 8". Almost any tool vendor has them. Just get the vendor's best quality slow speed grinder and you can't go wrong.---Jack

Re: Bench Grinder Recommendations

#4

Jack Guzman from Maine

brand name

Jack Guzman from Maine

If you are looking for a brand name you can trust Baldor is known as one of the best. I don't own one but that is what I have heard/read.---Jack

Re: Bench Grinder Recommendations

#5

Re: brand name

ChuckInND

I bought a Kalamazoo 1" belt bench grinder, and they do make a 2" belt grinder. It is made in the USA, and came with a Baldor motor. I have been using it occasionally for a couple years, and the bench stone type grinder hardly ever gets used anymore.

Re: Bench Grinder Recommendations

#6

Jesper, Denmark

Re: Bench Grinder Recommendations

Jesper, Denmark

Tommy,

My 8" Baldor 4 pole 1800 rpm (theoretical) was expensive 20 years ago. never a problem in all this time. 3/4" shaft, 3/4 hp and all cast iron. Runs silent and true and seems to keep running for a long time after you turn it off.

Runs beautifully now for 14 years on 50 Hertz at 1500 rpm.

Re: Bench Grinder Recommendations

#8

Re: Bench Grinder Recommendations

Derek Cohen (in Perth, Australia)

Hi Thomas

If you plan to be hollow grinding bench chisels and plane blades, not to forget lathe chisels, then I recommend the set up I have. It should last a long time, provide top level performance, and require the least upkeep:

half speed 8" grinder with 1 x 180 grit and 1 x 80 grit CBN wheels. (The hollow from a 8" is a good compromise of depth - the 6" wheel is a little deep for my taste. Half speed reduces heat, which is important with carbon steel, not so relevant with high speed steel).

CBN wheels are the duck's nuts!

The Ultimate Sharpening System: http://www.inthewoodshop.com/WoodworkTechniques/UltimateGrindingSharpeningSetUp.html

Regards from Perth

Derek

Re: Bench Grinder Recommendations

#9

Re: Bench Grinder Recommendations

Larry Clinton At Frankfort, (Central) Indiana

I have an 8" Baldor on a pedestal stand. I use the white friable wheels from Lee Valley on it, keeps the heat down somewhat although I do use water for coolant. I also have a small 4" (think it is branded Singer) which has course and fine standard wheels and a very slow horizonal stone on top. I also have accumulated a 6" Craftsman grinder with a wire brush on one side and a carbide impregnated rubber wheel on the other and a small "wet" grinder. Most of mine came from auctions so got them cheap.

Bills idea sounds the best, don't think you can beat a Baldor and if you are limited to one speed I would go for 1800 RPM. One of the biggest issues though is the wheels you use. The friable (soft binding agent) wheels break down fast, the abrasives that fly off carry away a lot of the heat. If you grind slowly and cool your work-piece in water often you can keep the temper in your carbon steel tools. As has been stated "High Speed tool steel" doesn't matter much as it must reach almost red/white heat to remove the temper.

Wet grinders are great but usually much slower in removing material. Using a wet grinder almost guarantees you won't remove any temper.

Re: Bench Grinder Recommendations

#10

Re: Kalamazoo and baldor

david weaver

I have both the kalamazoo 1x42 and the 6" baldor grinder.

They went up in price for a little bit, but maybe they've come back down? I don't know.

The thing I like about both of them is that they are simple, and in the case of the baldor, instead of using cheap plastic switch or board wiring, there's a simple old style steel toggle that could be found anywhere if it needs to be replaced.

I don't really use the belt grinder for much, but in the event you're doing light duty toolmaking, it still comes in handy.

(I bought the baldor stuff on principle, I'm sure one could find a taiwanese or chinese grinder of some type that was as good or close to as good for lots less - but without having to settle for the really low priced entry level junk made to low spec).

Re: Bench Grinder Recommendations

#11

Woodcraft has Rikon 15% off until 2/14