Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Actually finished a project!

Posts

Actually finished a project!

#1

Actually finished a project!

Jesse Cloud

There's a reason I haven't posted a project for a long while. A couple of years ago I had an accident in the shop that messed up a finger pretty badly. Took a year of rehab to be able to hold a chisel well enough to do something useful. Then a bad bout of sciatica. But, after three years, I have finished a dresser for my wife.

The dresser has bow-fronted laminated drawers faced with quarter-sawn cherry veneer. The inlay is holly.

The top and the shop made moulding are solid cherry.

The drawers are dovetailed at an angle to match the front of the curve.

I can't claim to be a master woodworker, but I'm certainly a stubborn one. ;)

Thanks for looking.


Re: Actually finished a project!

#2

Re: Actually finished a project!

joey

look like a Master to me

Re: Actually finished a project!

#3

Re: Actually finished a project!

Barry Irby

That's a beauty. I'm sure your wife is pleased. I'd like to see a closeup of the dovetails.

Sorry about your accident. Glad you are recovered. I know the feeling.

Re: Actually finished a project!

#4

Re: Actually finished a project!

Jesse Cloud

Thanks for the kind words Barry. Here's a picture of the dovetails.

Re: Actually finished a project!

#5

Re: Actually finished a project!

Barry Irby

I am impressed. I have a Leigh jig and have made lots of dovetails with it. I have only done a very few by hand and that was a long time ago. I NEED to work at that. Those are very nicely done. Thanks.

Re: Actually finished a project!

#6

Re: Actually finished a project!

Lee Schierer in McKean, PA

Very nice. It looks great.

Lee

Re: Actually finished a project!

#7

Adam of Oakland

Re: Actually finished a project!

Adam of Oakland

Jesse that is a fantastic piece! I love the scale and the proportions, and the gentle sweep of the drawerfront curves. Really successful.

The intentionally varied spacing of the dove tails are a real nice treat to see as well, these were done bby hand, yep.

Glad your finger is on the mend.

Do you have a closeup to share of the molding profile along the top?

-Adam of Oakland, CA, USA

Re: Actually finished a project!

#8

Re: Actually finished a project!

ChuckInND

Impressive.

Re: Actually finished a project!

#9

Well then...

David Yoho

Now that you are able to get back to working wood I hope you'll be sharing more of your work with us. Well done sir!!

Who doesn't love the warmth of cherry? It's one of my favorites. The nine foot dresser I've been working on is complete and waiting for delivery in a week. It is mostly cherry with some maple and birch mixed in but they all play well together.

That's certainly a project you can be proud of, especially after overcoming the health issues. Thanks for sharing.

Re: Actually finished a project!

#10

Wait, Wait, another question....

Barry Irby

Did you make those pulls? If not, where did you get them? Close up?

Re: Actually finished a project!

#11

Nice work

Bill Tindall, E.Tn.

I built a bow front and found adding curves makes a project way harder! That is a nice place to put you socks. Hope to see it in the Member Gallery soon.

Re: Actually finished a project!

#12

Re: Wait, Wait, another question.... *LINK*

Jesse Cloud

They are an Amerock product, widely available. Don't remember where I bought them, but here's a link to one vendor


Drawer pulls used on dresser

Re: Actually finished a project!

#13

Re: Actually finished a project!

Thomas Skaggs, Foothills of Mount Level

Jesse,

So glad to hear you are able to work again. I'm sure working on this project must have been therapeutic. That's a very handsome piece. Well done!!

Thanks for sharing.

T.

Re: Actually finished a project!

#14

Re: Actually finished a project!

Mark Hennebury

Beautiful piece!

A nice graceful piece; i love the subtle contrast of the Holy inlay.

Re: Actually finished a project!

#15

Re: Actually finished a project! *LINK*

Jesse Cloud

Thanks for those encouraging words.

Here's a pic of the edge profile. It was made with an ellipse shaped bit from Whiteside (link below). I Raised the cutting profile up a bit off center to get the lopsided effect on the edge. More interesting than a symmetrical one to my eye at least.

I used a 1.25 inch OD bearing that rode on an mdf template screwed onto

the bottom of the workpiece. The template was the shape of the drawer curve with an extra 1 inch radius.




router bit for edge profile

Re: Actually finished a project!

#16

Looks great Jesse!

John in NM

I like bow fronts a lot, they do add a lot of work as Bill notes, but the effect is well worth the effort.

Re: Actually finished a project!

#17

Re: Actually finished a project!

jgdillon

Jesse, beautiful dresser and lovely proportions! I love slightly curved surfaces, especially on drawer fronts, but haven't yet summoned the courage to attempt any. I've done a project with angled dovetails, but never curved ones. I found the layout to be the most time consuming. Thanks for posting and I hope your wounds continue to heal. Jim

Re: Actually finished a project!

#18

dovetail can be no different for bow front

Bill Tindall, E.Tn.

One way to make a bow front is to lay up thick stock for the drawer front. Cut the bow for the front but not the back. Then lay out dovetails and it will be no different from doing it on a flat drawer. After the dovetail pins are cut in the drawer front, then cut the back arc of the drawer.

Re: Actually finished a project!

#19

Re: Actually finished a project!

Virgil Johnson

Nice work.

Re: Actually finished a project!

#20

Re: dovetail can be no different for bow front

jgdillon

Bill, yes you are right. That method of construction is one I am familiar with but never tried. Maybe someday... . So much to do, so little time! Thanks for reminding me of that technique. Jim

Re: Actually finished a project!

#21

a reason to avoid it, that isn't

Bill Tindall, E.Tn.

The thing I feared when cutting the arc from an assembled large chunk of wood was how would I successfully smooth it after band sawing. Bending the arc from laminations eliminates this step, making it an attractive alternative.

I was told by Steve Hamilton of the Headley shop, "fear not, for it is easy to hand plane it smooth enough". "Easy" and "hand plane" are seldom used in the same sentence. Well, it did in fact turn out easy. The band saw tooth marks provide depth gauges to guide the planing to keep it uniform. Because the surface will be veneered it is not essential to get it perfectly free of band saw tooth marks.


Re: Actually finished a project!

#22

Re: Actually finished a project!

Johanna Johanson

Lovely, Jesse!

Sorry to hear about your shop accident - I had begun to think you had left Placitas!

I am just getting back to woodworking after a five year hiatus caused by more job that could realistically be handled by one person. I retired at the end of July (although I still work part time for the school district), so now I have time for woodworking again. I'm taking a class from Michael Hoffer at SFCC this semester - great class.

Would you please post a picture that shows the inlay on that dresser? I am about to tackle inlay for the first time, so maybe you will be a resource!

Re: Actually finished a project!

#23

Very nice Jesse


Re: Actually finished a project!

#24

Re: Actually finished a project!

Jesse Cloud

Johanna, thanks for the kind words and congratulations on your retirement.

The inlay is nothing fancy, just straight lined 1/16 square holly. Getting it on the

curved surface was a little tricky. I used a thin mdf template that would clamp down across the curve to guide the router.

I would be happy to help with any inlay questions that might come up.

Still in the same place in Placitas.

Re: Actually finished a project!

#25

Beautiful!

Joanne in Point Pleasant, PA

I love the dovetails and the side indents for the drawer slides. Nice!