Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

8 Feb 2016

Good Morning Everyone,

I've had a little time to play the guitar I just finished building and found that I got one of the grooves for one string just a tad too deep and the string has a dead sound to it. Now it's time to figure out how to fix that little issue and get back to playing it again. I really like how well it plays and how well it sounds. The Telecaster building is now under way and I hope that this guitar plays as well as the first one I just finished. This has really been fun.

Getting back to oncall duty and my hope is that it is quiet enough to where I will get some sleep during this week.

That's all for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Delivered the monster dresser

David Yoho

Although finished two weeks ago, between the weather and availability of my son's schedule, I was finally able to unload my shop of all the subassemblies for the monster dresser and deliver it on Saturday. I can once again walk in my shop without dodging all the finished components to get around!

To refresh the details - the dresser was to be 9-ft. long with 4 banks each of 4 drawers. The carcasses were made from birch ply and solid maple. The drawer boxes were poplar with 1/4-inch solid Spanish cedar bottoms and featured applied drawer fronts of cherry with inlaid strips of figured Makore (AKA - African cherry). The feet are maple and the 104-inch-long top is cherry. The drawers ride freely on full extension ball bearing soft-close slides I got from Lee Valley.

The two drawer cases were set in place and attached with screws creating one unit. Once the top was set in place and attached, I installed the 16 drawers. The customer was thrilled with the soft closing action.

I've never considered myself as much a designer as a builder. I usually talk to the customer and try to get their vision of what they want and go from there. In this instance I was given overall dimensions, color and tone of finish, and number of drawers desired. The rest was up to me. Since this dresser (and the already delivered king size headboard) was for the customer's young adult son, I decided to go with a more contemporary look that more closely fit his tastes.

Getting good pictures after it was assembled was tricky due to space limitations, a window with sunshine pouring in just above it, and the size of the thing. The customer had someone come and open the wall between two bedrooms upstairs to create one large space. They cut a large opening in the wall leaving short sections at each end. The dresser sits about 4 inches from the rear section on the left end and not too far from the closet on the right end.

The customer and his son were very happy with my work. They especially liked the nice scent that the Spanish cedar added to the drawers and the soft close ability. I have a feeling after I left the son went and played with the closing action of the drawers. He was quite taken with that feature and I guess he'd never seen it before!

Now I can get to the numerous projects my wife and I want for our new river cottage. I'll be starting with a 5-ft. maple farm table for the kitchen.


Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Brian Roberts

Assuming a bone nut....

Fill the slot with baking soda....pack it in...then very carefully (we used the smallest pipette available) wick some water thin super glue into the baking soda....starting from the bottom of the slot.

Best to tape on both side of the nut first.

It will harden quickly as the baking soda acts as an accelerator.

Then re-cut the groove.

Of course the best option is to knock out the nut and make a new one......but the fill option is done routinely in the repair world.

Re: WC Weekend Accomplishments....

#4

Beautiful work David!

Don Orr

Thanks for posting the final piece in situ.

My eye is drawn away from the beautiful drawer fronts by the seemingly (to me) incongruous bun feet. Were it me I might have preferred a more modern looking linear/angular foot/leg. If the customer is happy then that is all that really matters. I am certainly no design expert.

Re: WC Weekend Accomplishments....

#5

Re: Beautiful work David!

David Yoho

Thanks, Don. I'm not in disagreement with your assessment. Those feet don't go along with the flavor of the rest of the dresser. When I showed him choices, those were what he picked even after explaining my vision for the project. Such is life!!!

Re: WC Weekend Accomplishments....

#6

Re: Beautiful work David!

Don Orr

Still a beautiful piece of work David. The customer is always right ?