General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Carol Reed 3/30/10, 4:00 PM
17 Replies · 39 ViewsLast post 3/31/10, 12:28 PM by Lee Schierer McKean, PA -
Another Night of Tinkering with the BandSaw 2
by Ken Bellock (Houston, TX) 3/27/10, 3:48 AM
25 Replies · 56 ViewsLast post 3/30/10, 11:14 PM by Ken Bellock (Houston, TX) -
by Wayne Carson 3/30/10, 4:00 AM
6 Replies · 46 ViewsLast post 3/30/10, 9:41 PM by Bill Tindall, E.TN. -
by Victor P 3/29/10, 3:18 PM
6 Replies · 37 ViewsLast post 3/30/10, 8:39 PM by Victor P -
by eliot feldman 3/27/10, 2:08 PM
13 Replies · 38 ViewsLast post 3/30/10, 5:53 PM by AZ, Colorado Springs -
by Dustmaker Mike 3/29/10, 11:29 PM
8 Replies · 22 ViewsLast post 3/30/10, 5:25 PM by Bill Houghton -
by Lee Schierer McKean, PA 3/29/10, 7:10 PM
3 Replies · 14 ViewsLast post 3/30/10, 12:42 PM by Phil Joines -
by Carol Reed 3/26/10, 8:12 PM
47 Replies · 121 ViewsLast post 3/30/10, 12:36 PM by Mark Mandell - Gone Round In Jersey -
by Stephen Shepherd 3/30/10, 11:43 AM
0 Replies · 18 ViewsLast post 3/30/10, 11:43 AM by Stephen Shepherd -
Outfeed table/workbench for my Unisaw!
by Charles Jackson III 3/30/10, 1:16 AM
1 Reply · 20 ViewsLast post 3/30/10, 3:19 AM by Bill Houghton -
Considering buying a new jointer
by Dave Nichols 3/29/10, 12:04 PM
5 Replies · 50 ViewsLast post 3/30/10, 2:16 AM by Howard Norman -
WC Weekend Accomplishments....
by Dennis E Peacock 3/29/10, 1:53 PM
4 Replies · 16 ViewsLast post 3/30/10, 1:11 AM by Ellis Walentine -
by Wayne Carson 3/28/10, 10:22 PM
13 Replies · 53 ViewsLast post 3/29/10, 11:38 PM by Wayne Carson -
by Bill Tindall, E.TN. 3/29/10, 12:31 PM
10 Replies · 42 ViewsLast post 3/29/10, 8:35 PM by Charles in Mtl. -
by Larry in NW Ohio 3/29/10, 7:32 PM
0 Replies · 20 ViewsLast post 3/29/10, 7:32 PM by Larry in NW Ohio -
by Frank Orfanello 3/29/10, 1:14 AM
5 Replies · 18 ViewsLast post 3/29/10, 7:14 PM by Grant in Iowa -
1/4 inch by 4 inch oak boards in bulk
by beth snyder 3/29/10, 2:02 PM
7 Replies · 22 ViewsLast post 3/29/10, 5:09 PM by Bill Tindall, E.TN. -
by Larry in NW Ohio 3/29/10, 12:30 PM
1 Reply · 16 ViewsLast post 3/29/10, 12:33 PM by Lee Schierer McKean, PA -
by Ken Bellock (Houston, TX) 3/26/10, 3:09 AM
8 Replies · 40 ViewsLast post 3/29/10, 10:16 AM by wilbur -
by Joey, New Canaan, Ct. 3/27/10, 11:06 PM
10 Replies · 37 ViewsLast post 3/29/10, 9:53 AM by Joey, New Canaan, Ct. -
OT - Rep. Windows - Counter-Offers to Quotes?
by Doug Ring 3/26/10, 8:11 PM
11 Replies · 68 ViewsLast post 3/29/10, 4:59 AM by Doug Ring -
by Bob in NE Ohio 3/28/10, 6:53 PM
4 Replies · 22 ViewsLast post 3/29/10, 1:40 AM by Dave Tenney -
How to find report on Car wreck??? OT
by Barry Irby 3/28/10, 11:12 PM
1 Reply · 51 ViewsLast post 3/28/10, 11:35 PM by Mark Mandell - Gone Round In Jersey -
Source for extruded butt hinges
by Bill Tindall, E.TN. 3/28/10, 8:34 PM
1 Reply · 16 ViewsLast post 3/28/10, 10:22 PM by John in NM -
End drilling a post question...
by Barry Irby 3/26/10, 1:01 PM
20 Replies · 37 ViewsLast post 3/28/10, 9:27 PM by Barry Irby -
by Charles Jackson III 3/28/10, 7:34 PM
2 Replies · 34 ViewsLast post 3/28/10, 9:16 PM by George -
by Bob S 3/27/10, 12:44 AM
4 Replies · 29 ViewsLast post 3/28/10, 9:07 PM by Alan -
dust collection system pipe near San Jose, CA
by Eric Kuehne 3/28/10, 5:17 PM
4 Replies · 16 ViewsLast post 3/28/10, 8:09 PM by FredD -
Align pulley key on motor spindle
by Stephen Kirk 3/26/10, 11:16 PM
10 Replies · 40 ViewsLast post 3/28/10, 7:44 PM by Barry Irby -
bristle skirt for dust collector
by Howard 3/27/10, 1:35 PM
12 Replies · 38 ViewsLast post 3/28/10, 7:37 PM by Alan



