Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Local Sharpening

Posts

Local Sharpening

#1

Local Sharpening

Bob in NE Ohio

I just started looking at new blades for my 6" jointer (set of 3,6 x 1 x 1/8) and it appears that with shipping they are over $50. Seems kind of high but it has been a while since I purchased any. I was wondering if knows of a better source to buy the blades or somewhere in the Cleveland / Akron area where I could get the old ones sharpened?

Thanks for the help

Bob

Re: Local Sharpening

#2

Re: Local Sharpening

Grant in Iowa

Bob,

Pretty much every major town has some sort of a sharpening service business. Cleveland certainly has several.

Best bet is to ask your local tool supplier (whoever sells machine tools) where they recommend you go. If I were you, I'd try to find a one stop shop where you can also get bandsaw blade made, and perhaps get things like industrial grade cutters like Whiteside or CMT router bits.

If that source of recommendation doesn't pan out, just look in your yellow pages for "sharpening service".

I find these places are the best place to get bandsaw blades made for a reasonable price, too.

FWIW,

Grant in Iowa

Re: Local Sharpening

#3

Re: Local Sharpening

FredD

Check out a Cabinet shop or two, they always know where to go.

FredD

Re: Local Sharpening

#4

Re: Local Sharpening

Jim Pugh

Bob, look into Cleveland Tool and Cutter in Strongsville. Actually, west of town on Rt. 82.

Re: Local Sharpening

#5

Cammel Saw Shop in Canton

Dave Tenney

Been using them for years.

http://www.cammelsaw.com/

Dave