Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Considering buying a new jointer

Posts

Considering buying a new jointer

#1

Considering buying a new jointer

Dave Nichols

I have a 6" now, at the time I bought it I had hoped to get an 8" but didn't have vehicle to put it in for trip home, shipping wasn't an option since I was never home during the day. I now am retired with a new truck so was thinking of a trip to Grizzly to get an 8" model, was wondering if anyone has any expereince with their jointers which are made in China.

Re: Considering buying a new jointer

#2

Re: Considering buying a new jointer

Bob in NE Ohio

I have had their 6" for 18 years with little or no problems. I too would like to upgrade to a larger unit. Let us know what you decide

Bob

Re: Considering buying a new jointer

#3

Re: Considering buying a new jointer *LINK*

mdclor

Dave,

I have the one at the below link. I have been very happy with the 8" width and the longer bed is a real bonus for me. The spiral cutter head virtually eliminates tear out. The bed adjustment is quick and easy to use. I would but this machine again. I think they have an annual sale around Father's Day, IIRC.

HTH,

Merle


G0490X

Re: Considering buying a new jointer

#4

Re: Considering buying a new jointer

Tony - Memphis

I have had their 6" jointer for around 13 years (wow! - doesn't seem that long). I had some initial issues with the machine and their service and have "sworn off them," but the jointer has performed without issue for the past 13 years, so I can't really complain. The issue was simple and a quality control issue, but they never fixed it and the folks I worked with were, well, not very nice. They used it have a store in town. I fixed the problem myself. The swivel fo rthe fence was very loose and the fence would not stay in adjustment. It still moves a little, but I just check it often to make sure it is still sqaure to the bed. I'm planning on upgrading to an 8" myself. Seems like every board I buy is 7" or 8" wide and i have to rip off an inch or two. I'm just not sure I can fit one in my shop. I'm running out of room.

Enjoy your new toy!

Tony

Re: Considering buying a new jointer

#5

Re: Considering buying a new jointer

FredD

By all means , what ever brand you opt for , include a carbide helical head.

Delta needs to be retrofitted, (I have one), PM comes with one if you order it that way and Griz advertises a spiral cutter head which I believe , may be inferior to a Helical carbide job,but better then straight knives.

FredD

Re: Considering buying a new jointer

#6

Re: Considering buying a new jointer

Howard Norman

I have the Grizzly G0490 8" regular knives. Mine came in the first shipment from China about five years ago now. Had an initial problem which they resolved, no problems since. The helical head would be nice but I couldn't have spent the extra money at the time even if it had been available which it wasn't. I doubt that I will ever make the conversion now.