Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Source for extruded butt hinges

Posts

Source for extruded butt hinges

#1

Source for extruded butt hinges

Bill Tindall

For a long time I ordered such hinges from Whitechapel. Of late the selection has shrunk and the quality of the last I bought was poor. The hinges were drilled for a #6 screw and counter sunk for a #5. And, they weren't finished very well. All I can say positive is that they had tight barrels.

Re: Source for extruded butt hinges

#2

Re: Source for extruded butt hinges

John in NM

that's bad news Bill, Whitechapel has always been a good supplier of high quality hardware. Horton Brass is another, maybe they haven't slipped yet.

I bought a lot of Deltana hinges for our windows when we were building our house. They're a nice heavy cabinet hinge, but perhaps a little looser around the pin than some, as the pin is removable. In use I've noticed no great difference. Style might be tough, as they're more for the high end kitchen/bath trade than period furniture, but if you get a ball tip in oil rubbed bronze and go over it with 4/0 steel wool it looks ok.