1/4 inch by 4 inch oak boards in bulk
beth snyder
Knowledge You Can Build On — Est. 1998
1/4 inch by 4 inch oak boards in bulk
beth snyder
Re: 1/4 inch by 4 inch oak boards in bulk
beth snyder
Sorry! I didn't get the message written!
I'm looking for a reliable source for some special wood.
I need:
1/4 inch thick by 4 inches wide by 3 or 4 feet oak boards. I'm building recipe card boxes and have been buying the boards at Home Depot, but I now need to purchase 500-1000, and need a good place to get them reliably.
Thanks so much in advance!
~Beth
Re: 1/4 inch by 4 inch oak boards in bulk
Barry Irby
Beth, Search WOOD FINDER on this site. A number of wood suppliers are there. You may have to rummage a bit.
Search Woodfinder for "thin wood" *LINK*
Ellis Walentine
The link is also at the top and bottom of our messageboard index pages.
Tell them Woodfinder� sent you.
Ellis Walentine, Host
Woodfinder�
Re: 1/4 inch by 4 inch oak boards in bulk *LINK*
Lee Schierer McKean, PA
Without knowing where you are located it is hard to know it this helps. My hardwood supplier carries 1/4" x 4 (actually 3-1/2) boards. I don't know if they will ship lumber.
Re: 1/4 inch by 4 inch oak boards in bulk *LINK*
John McGaw
I have only once needed enough thin hardwood to make processing it from scratch overly difficult. After some research I finally ordered a bunch of 1/4" cherry from Wall Lumber. The product was entirely satisfactory. The wood comes in random widths but since I needed 8"+ widths edge-jointing and gluing-up was in the cards from the start for me. All of the wood matched up very nicely and gave just the results desired.
If you wanted special widths and were buying in large quantities it might advantageous to discuss you needs with the owner.
http://www.walllumber.com/thin.asp
Re: 1/4 inch by 4 inch oak boards in bulk
John K Jordan
Red oak, white oak?
If price is an issue, you might consider having it sawn (perhaps to 1/2") then dry and plane it yourself. Thin wood air-dries pretty quickly. Oak has a tendency to warp but stickered and weighted 1/2" boards may not be a problem.
JKJ
just what you need
Bill Tindall
the place that makes this kind of lumber for Woodcraft and others is Cormark International. 828 658 8455 in Asheville, NC. They ship. Nice folks. ask for Fabs Corte. Be sure to tell him you are a business and request wholesale pricing.