Who made these
Wayne Carson
I am looking for a set of these if enywone knows of them or piece meal. 
Knowledge You Can Build On — Est. 1998
Who made these
Wayne Carson
I am looking for a set of these if enywone knows of them or piece meal. 
Re: Who made these
Barry Irby
I had some sort of like that that I think came from Sears. If I have any left they are literally forty or more years old.
Why do you want them? Are you specifically interested in the exact parts for some reason? Or do you just want to drill holes that match screws?
I have several sets of drills(if you can call them that) that consists of a tube with a quick couple on it and you snap in a "bit" that has a drill bit on one end and a driver pit on the other. You can change the drill part to match different screw sized and the driver bits are interchangeable also. this allows you to quickly flip it form drilling the hole to driving the screw. They have been made under several brand names (makita and porter cable) and are sold at Lowes and other stores.
If you want me to rummage up the rest of the ones I have like yours, I will and you can have them.
Re: Sears, about 40 years ago
Jim DeLaney, Austintown, Ohio
I have a whole set - except for a couple that broke (twisted the tip off) - that probably hasn't seen daylight in thirty years. They're laying in a drawer somewher in the back of the shop.
If you want them, let me know. Just pay postage. They'll easily fit in a small Flat Rate box.
Re: Who made these
JL
Do you need those type of countersinks or would any work for you?
I haven't seen that type in quite a few years.
Re: Sears, about 40 years ago
Wayne Carson
Jim Email sent
Re: Who made these
Wayne Carson
The type with the countersink is what I am looking for
Re: Who made these
Galen Vetterick
I agree with Berry, I may have purchase at Sear or back to old Montgomery Wards days. I have five differnt sizes and the aluminum stop that set the depths.
Have an old Black and Decker set of five that literally have rolled metal hollow shaft not solid shafts. Really cheap!
Just a kid then and always got cheap tools to get by.
Why on earth do you want?
Galen
Re: Who made these
Wayne Carson
I really like the way they work But I only want the solid shaft ones, a very long time ago I had some of the rolled shaft ones they arn't the same, I guess I like them for the same reason I like the old wood hand planes just do. When I purchased the ones I now have The woman sent me a part that looks like it fits a different size shaft that looks like you can change the bits by pulling them out and putting another one in but it doesn't fit my shafts.
Wayne
Re: Who made these
Galen Vetterick
See your two and raise you five plus a kicker!
I could part with them if you need.
Re: Who made these
Wayne Carson
the ones I have have 4 or 5 for the same size screw with different lengths for each .
Re: Who made these
Gary Smyth
I have the slightly different set from Craftsman than some others do. This one came from a house sale, the price was $3 . Notice that #7 (first one right side --6-7, 1") is bent. No model number just a silver and black label, Sears Craftsman 
Re: Who made these
Jorge Casta�eda
Wayne,
I had those and they broke,
I got a set from Fuller, a tapered drill bit and matching countersink in 1974, stilll going strong in 2010.
They can make that deep countersink we needed for covering screw holes with bungs.
Check around I am sure Woodcarft carries them.
Jorge
Re: Who made these
Gerry In North Surrey
Lee Valley stocks a dandy set of these, I've used 'em for quite a few years now. They are well machined and adjustable.
Gerry
Re: Who made these
Wayne Carson
looks more like what I have I assume the short gismos are for changing bits?