Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Align pulley key on motor spindle

Posts

Align pulley key on motor spindle

#1

Align pulley key on motor spindle

Stephen Kirk

The key which locks the pulley in place on the spindle of my jointer motor came out and the slot for key is now misaligned. Even with the pulley set screws all the way out I can't remove the pulley to align the slots. I can't turn the pulley on the spindle without also turning the spindle.

Any idea how I fix this? Doesn't seem like it should be tough.

Re: Align pulley key on motor spindle

#2

Re: Align pulley key on motor spindle

Barry Irby

I used to have a cheap stamped pulley on my TS motor and the key would disappear about once a year.

You might try soaking the shaft with penetrating oil or PB Blast or a mix of Acetone and transmission fluid and wait a while. Use a pulley puller to extract the pulley. the pulley probably slipped on the shaft and called it. You may have to file or smooth the shaft.

To keep it from happening again I finally learned to soak the setscrew and key in Loctite. You can also put a second set screw on top of the first one in the same hole. Have you checked yours for a second screw under the first one?

Re: Align pulley key on motor spindle

#3

Fixed

Stephen Kirk

I tried WD40 and with a little work got the pulley off and re-aligned it. Now she runs smooth and quiet and my power doesn't drop off.

Thanks for the tip!

Re: Align pulley key on motor spindle

#4

Great, Gotta love it when a plan comes together...

Barry Irby

OOPs... Just reread my post to see if I mentioned WD-40 and noticed the spelled checker changed gauled to called. Spell checker thinks Gaul is France. Maybe the word I am looking for is gall??? Was the shaft scarred?

Glad you got it. The Locktite was critical for mine. Before I used it the key came out almost routinely. Eventually I replace the pulley with a machined one.

Re: Align pulley key on motor spindle

#5

Re: Align pulley key on motor spindle

FredD

I ran my new Delta D-JX jointer for a short while and the cutter head stopped.

The guy working with me on some stuff for his wife , said I can get it no problem.

Sure enough , after back was off we could see the key had come out.

He put it back and reassembled the back panel and less then a minute later same thing.

Did it over , same thing, then I finally got down on my knees, grabbed the pulley out and looked at it.

Well you guessed it, there was another key on the other side of the pulley.

Put both back with a liberal coat of Blue Lcotite and now it is just fine..

One nice thing about Delta, they had taped the right size Allen wrench on the motor.

FredD

Re: Align pulley key on motor spindle

#6

Spelling is "galled"

Bill Houghton, Sebastopol, CA

I think you must have mixed it up in the back of your mind with "caul." English is SUCH a logical language - inevitable, I guess, for a language assembled from spare parts of lots of different languages.

I'm not sure what it would mean to be "gauled," though if it involved Brigitte Bardot, Catherine Deneuve, or Audrey Tautou, I might be willing to find out.

Re: Align pulley key on motor spindle

#7

Re: Great, Gotta love it when a plan comes togethe

Stephen Kirk

I'll keep an eye on it, make sure it isn't coming loose again and loctite if need be. I'll be back out in the shop soon on a project that'll need a bunch of jointing.

Didn't seem like it was galled, still felt pretty smooth. I noticed that the threaded locking thingies (really don't know a name for them) had been working loose which let the key out.

I'm happy it wasn't something more serious. like requiring a motor replacement.

Re: Align pulley key on motor spindle

#8

Re: Align pulley key on motor spindle

Stephen Kirk

That was awfully nice of them. Glad you got back to running. I prefer to be a woodworker, not a machinist technician.

Re: Align pulley key on motor spindle

#9

threaded locking thingies

Bill Houghton, Sebastopol, CA

are probably set screws, unless you're in England, in which case they're probably grub screws.

Re: Align pulley key on motor spindle

#10

Yeah, that's it!

Stephen Kirk

But I really like grub screws. Course every time the chickens got in the shop they'd eat 'em all.

Re: Align pulley key on motor spindle

#11

Re: Spelling is "galled"

Barry Irby

Obviously you don't know any French people as well as I do. If you did the idea that "Gauled" would equate to a shaft that had been abraded and rubbed the wrong way would make perfect sense.

Thanks