General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Tom Dunlap 9/15/13, 3:52 PM
6 Replies · 31 ViewsLast post 9/16/13, 3:19 PM by John Pappas -
by Bob 9/14/13, 2:23 AM
2 Replies · 18 ViewsLast post 9/16/13, 3:49 AM by Bob -
by Barry Rubenstein 9/14/13, 10:49 PM
4 Replies · 28 ViewsLast post 9/15/13, 9:47 PM by don stephan -
by Bhavesh 9/12/13, 6:43 AM
4 Replies · 23 ViewsLast post 9/15/13, 3:43 PM by Jack Guzman from Maine -
by Howard in Toronto 9/15/13, 12:37 AM
0 Replies · 25 ViewsLast post 9/15/13, 12:37 AM by Howard in Toronto -
That desk I am making for my daughter
by Joe 9/3/13, 1:20 PM
19 Replies · 44 ViewsLast post 9/14/13, 11:57 PM by Bill Tindall, E.TN. -
by Tom Dunlap 9/12/13, 3:35 PM
13 Replies · 70 ViewsLast post 9/14/13, 11:15 PM by Rod Peterson—Ormond Beach, FL -
by don stephan 9/13/13, 12:33 AM
11 Replies · 70 ViewsLast post 9/14/13, 4:42 AM by Bruce, a MN Galoot -
Woodworking in the 18th Century Registration Open
by William Duffield 9/13/13, 7:18 PM
0 Replies · 27 ViewsLast post 9/13/13, 7:18 PM by William Duffield -
by Joseph Mulherin, sr 9/10/13, 1:16 PM
9 Replies · 21 ViewsLast post 9/13/13, 2:06 PM by Joseph Mulherin, sr -
Macabre Thought Re: Wood - and bones?
by charlie belden 9/10/13, 7:54 PM
7 Replies · 45 ViewsLast post 9/13/13, 1:11 AM by Tom Dunlap -
by Michael Donaldson 9/12/13, 2:51 AM
4 Replies · 19 ViewsLast post 9/12/13, 3:36 PM by Ellis Walentine -
by Gary Smyth 9/11/13, 10:39 PM
8 Replies · 18 ViewsLast post 9/12/13, 10:55 AM by Andy Halterman: A pedaling fool -
Good deal on sanding sleeves *LINK*
by John in NM 9/11/13, 5:44 PM
0 Replies · 28 ViewsLast post 9/11/13, 5:44 PM by John in NM -
by terry gearhart 9/10/13, 5:33 PM
4 Replies · 37 ViewsLast post 9/11/13, 4:33 PM by terry gearhart -
by Lee Schierer 9/8/13, 8:55 PM
3 Replies · 37 ViewsLast post 9/11/13, 2:56 PM by AZ -
by Jack Putnam 9/8/13, 3:15 PM
4 Replies · 31 ViewsLast post 9/11/13, 10:18 AM by John Lucas -
WC Weekend Accomplishments....
by Dennis E Peacock 9/9/13, 2:06 PM
10 Replies · 51 ViewsLast post 9/11/13, 1:17 AM by Jim in River Oaks, Ont. -
by rob storch 9/10/13, 2:35 PM
5 Replies · 21 ViewsLast post 9/10/13, 8:19 PM by Dick Coers -
by Stephen Shepherd 9/10/13, 7:53 PM
0 Replies · 22 ViewsLast post 9/10/13, 7:53 PM by Stephen Shepherd -
Graphite canvas for sander platen
by Keith Newton 9/6/13, 5:05 PM
3 Replies · 54 ViewsLast post 9/10/13, 4:02 AM by Rick L -
by Stuart Johnson 9/6/13, 12:54 PM
13 Replies · 27 ViewsLast post 9/9/13, 11:32 PM by Kneale Brownson -
OT - Mounting stuff in Hardi plank?
by JL 9/7/13, 4:24 PM
4 Replies · 43 ViewsLast post 9/9/13, 11:21 PM by Kneale Brownson -
by McKay 9/7/13, 5:07 PM
7 Replies · 29 ViewsLast post 9/9/13, 6:30 PM by Mike134 -
by Tom 8/28/13, 12:17 PM
6 Replies · 16 ViewsLast post 9/9/13, 5:58 PM by John E. in SC -
by John Foster 9/8/13, 10:15 PM
6 Replies · 49 ViewsLast post 9/9/13, 3:38 PM by Bill Turpin -
by David Yoho 9/9/13, 9:27 AM
0 Replies · 33 ViewsLast post 9/9/13, 9:27 AM by David Yoho -
Upholstery Staple Gun advice needed Please
by Barry Irby 9/8/13, 12:39 PM
5 Replies · 19 ViewsLast post 9/8/13, 8:43 PM by Jason Roehl in Lafayette, IN -
by Doug Reynolds in Seattle 9/2/13, 9:07 PM
14 Replies · 24 ViewsLast post 9/8/13, 4:17 PM by Dale Lenz -
What did I do to my table saw?
by David Hay @ Denver 9/3/13, 3:52 AM
8 Replies · 39 ViewsLast post 9/8/13, 2:01 AM by David Hay @ Denver



