Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

prototype lap desk

Posts

prototype lap desk

#1

prototype lap desk

McKay

I find the lap desk intriguing so I decided to build a prototype. It is not finished, but the easy part is done.

The box is cherry. I did not want the brass corners, so I used mitered dovetails.



The inlay are peach blossoms using Nicaraguan red heart and some other stuff. (sorry, I just look for color. I have a box of different woods and I don't try to keep track of what they are. )



I mix marquetry and intarsia together for the stem of the flower.



I used power tools to make the inlay, but hand tools to level and set the stems. I also used hand tools to cut the groove and inset the lid to the sides. I was going to use a hand saw to cut the lid free,

Cutting to the line is harder that you would think. I was off by ever so little and I was beginning to think that I would have to re-do the sides.

I then set up a jig on my larger band saw. This worked well.

I am thinking that the inside will take much more time than the construction of the box w/the hidden drawers etc.



It has been fun so far.

Hope you enjoy.

Re: prototype lap desk

#2

Re: prototype lap desk

Larry in nw ohio

McKay That is going to look SSSOOOO great and it isn`t even finished yet. I so wish I could do he inlay and intarsia. That really makes the project stand out. I wish you had pics of the whole project. Larry

Re: prototype lap desk

#3

Re: prototype lap desk

Bill Tindall, E.Tn.

I enjoyed looking. I am fascinated by "wood pictures", they seem so impossible to do.

Re: prototype lap desk

#4

Re: prototype lap desk

Merle

Wow!! You call that a "prototype"?????? I would be ecstatic if my "final" pieces looked that good.

Re: prototype lap desk

#5

Bob

Re: prototype lap desk

Bob

Very nice work. I am a big fan of Marquetry so much so I built and use my own “CHEVALET” I think the control you can get is far superior than a scroll saw keep up the great work.

Re: prototype lap desk

#6

Re:CHEVALET

McKay

I know that the control is better, but you are unable to do any bevel cutting...which is what I do most of. I certainly am not good enough to even take a class from Mr. Edwards. Just one of those dreams that will never be.

Re: prototype lap desk

#7

Bob

Re:CHEVALET *LINK*

Bob

Actually you can I do use the "double bevel technique" I can cut at 5 to 7 degrees by adjusting the arm in or out but found that by using the "piece by piece" method I am not restricted to the "Boulle Technique". Here are some photos of what is its capabilities are, this is NOT MY WORK its a friend I attended AFSM with. One of these days I will post a photo of some of what I have done since Feb 2013 its really not hard once you learn how its done.


http://lumberjocks.com/projects/80899

Re: prototype lap desk

#8

Re:CHEVALET

Mike134

You don't need to be good to take a class from Patrick, the reason to take the class is to get better at marquetry not to be good before you get there. Lots of people have taken his classes and had no experience with marquetry at all. There is also Paul Schurch in Santa Barbara teaching another method of marquetry focused more of scroll saw rather than chevalet. Basically two of the best guys doing marquetry today.

Mike