Sand shaded fans
Barry Rubenstein
I'm going to try making sand shaded fans for inlay. Does anyone know which wood to use for the half moon slice of black wood right above each triangle? Ebony? India ink dyed maple?
Knowledge You Can Build On — Est. 1998
Sand shaded fans
Barry Rubenstein
I'm going to try making sand shaded fans for inlay. Does anyone know which wood to use for the half moon slice of black wood right above each triangle? Ebony? India ink dyed maple?
Re: Sand shaded fans
Bill Tindall, E.Tn.
when I took the class with Latta we used dyed wood. I don't know what wood was dyed but it worked easier than maple.
Re: Sand shaded fans
JL
I haven't made the fans - but the demo I saw used poplar that had been dyed. I've been told that holly is also a good choice.
I repeat - I was only at a demo - and that was a couple of years ago.
Re: Sand shaded fans
William Duffield
Steve Latta, in his DVD, Fundamentals of Inlay: Making Ornamental Bandings, mentions several species that are used for black veneer. He notes that although ebony is used, it has a couple of disadvantages. It is very, very expensive, and it is brittle, and therefore doesn't work well for curved stringing, or when applied to a curved surface. For black dyed veneers, pear is probably the best, but it is getting very difficult to find. Other choices include poplar, English sycamore, koto from Japan, mahogany, anigre, and costello (sometimes spelled "castello"). The DVD, and three others by Steve Latta on inlaying techniques, are published by Lie-Nielsen. They are excellent sources of instruction.
http://www.lie-nielsen.com/catalog.php?grp=1320&sort=prd_author
Steve's DVDs are at the bottom of the page.
Re: Sand shaded fans
don stephan
Black dyed costello is a veneer I have used before. But it is so uniformly black that most people think it is paint. Now I used fumed white oak when possible. Not as uniformly black, but no one will mistake it for paint. My veneer supplier is www.certainlywood.com.