Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Crib/ChangeTable Plans

Posts

Crib/ChangeTable Plans

#1

Crib/ChangeTable Plans

John Foster

Hello;

I have been requested to make a combination crib and change table for my son and daughter-in-law who are expecting their first child in a few months. I have searched this site, and I have found previous inquiries about crib plans. I have had no luck here or anywhere else on the web to find plans for a crib with an attached change table. Does anyone have any thoughts? Thank you . John

Re: Crib/ChangeTable Plans

#2

Re: Crib/ChangeTable Plans

Merle

John, no plans, but do you mean something like the one at this link? If that is the case, then you can probably find and measure one in a store near you. HTH

http://www.toysrus.com/product/index.jsp?productId=3331892

Re: Crib/ChangeTable Plans

#3

Re: Crib/ChangeTable Plans

Bill Tindall, E.Tn.


Not what was asked for but this changing equipment was what wife used for our kids who in turn used it for theirs. They seemed to like the idea that it could be moved around and it stored the stuff used in changing.

Re: Crib/ChangeTable Plans

#4

Re: Crib/ChangeTable Plans

Bruce, a MN Galoot

This one served as the model for a dresser/changing table I made for our granddaughter and her parents. I used formaldehyde free plywood for the flat panels.

Re: Crib/ChangeTable Plans

#5

Re: Crib/ChangeTable Plans

Lee Schierer in McKean, PA

I have made two dressing tables and I have some dimensioned drawings of the pieces you see below that aren't plans but would give you a place to start. The first one is just a bitmap image, the second is an Autocad file.




Lee

Re: Crib/ChangeTable Plans

#6

Re: Crib/ChangeTable Plans

Larry in nw ohio

John I have three in the shop shots, one at 8/14/03 between 400-500, and one at 7/05/04 between 500-600 and the last one #890 at 8/03/08. I got the plans from Rockler and changed them a bit. I use all solid wood. Good Luck and have fun it`s worth it. Larry

Re: Crib/ChangeTable Plans

#7

Re: Crib/ChangeTable Plans

Bill Turpin in WNC mountains

Divide the top in two sections with middle support front to back . One side is open and covered with heavy canvas. The canvas is installed with a 3 to 4" sag. This provides a canyon that the baby can't get out of. On the other half, a flat top with a cut-out that matches a wash pan(with a lip) that can be lifted for emptying. Allow space on rear of this side to hold stuff like baby oil, powder, shampoo, washcloth. Have fun! Match this project to available space, available lumber, mama's height, etc. Save her back. Canvas could be mounted to a removable, but bolted on frame to allow for periodic washing. Leave space under table for a foot-operated trashcan. It has been 44 years since I made one, sorry no pics.