Finish application
Gary Smyth
These are sometimes called touch up, paint edge, or trim pads. With paint they are used to paint to right angles like ceilings. Load em up and drag it at the edge. It flows the paint using less skill than required by a cutting brush. They typically are about $2.00 each, and are throw away. Simply made, they have a styrofoam portion that is a handle, a 1/4" usually green foam backing, and a 1/4" nylon(?) short nap "brush" all glued together. I use them for finishing. They hold a lot of material, do not shed, minimize bubbles, and leave few tell tale "brush" strokes. Because they are wide and clean, I use them with shellac so I can do flat work in one pass as the shellac and alcohol evaporates so quickly in heat of summer. They also work great with thinned poly for the insides and outside of unassembled drawers.
Pics show the long brush I'm looking fors nap when new, and (in the plastic bag) a smaller version loaded with tinted shellac. The wood is a plain Ikea plywood box where the brush floods the board in a single drag as there are no "go overs" with shellac.
