Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

OT - Mounting stuff in Hardi plank?

Posts

OT - Mounting stuff in Hardi plank?

#1

JL

OT - Mounting stuff in Hardi plank?

JL

I was looking at my cedar siding before I was going to paint it. Regretfully, I discovered that the siding was rotting in certain areas. Rather than paint, we decided to replace with Hardi plank siding.

Hardi plank isn't as thick as my old cedar siding - and it is not wood.

I'll be remaking the faux shutters to mount on either side of the front windows. There are also one or two things that my wife would like mounted on the front wall. I'll try and mark the studs where they nailed - but that may be difficult in areas as they don't have nails on the top surface - only under the top plank.

So - I need to mount shutters. I don't have plywood underneath the Hardi plank - I have the insulation sheathing board. Any suggestions as how to securely mount the shutters?

Re: OT - Mounting stuff in Hardi plank?

#2

Re: OT - Mounting stuff in Hardi plank?

John Veerkamp

Sheet rock anchors, molly bolts, or the like.

Re: OT - Mounting stuff in Hardi plank?

#3

Re: OT - Mounting stuff in Hardi plank?

Larry in nw ohio

You might try a deep stud finder. I have one you could borrow. It did pretty good for me. When I thought it made a hit, I took a long 1/8 or smaller drill bit and where the two boards meet drill up and see if it did. Then cover the hole with caulk. Then from that hole you measure. Good Luck Larry

Re: OT - Mounting stuff in Hardi plank?

#4

Clint Searl

Re: OT - Mounting stuff in Hardi plank?

Clint Searl

Stainless screws and PL poly construction adhesive.

Re: OT - Mounting stuff in Hardi plank?

#5

Kneale Brownson

If you know where you want to mount stuff...

Kneale Brownson

Put a small mark on the lower portion of the planks where the nail, that gets hidden above, goes.