General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
Refinishing a Lane Cedar Chest
by Bill Tindall, E.TN. 10/20/13, 7:49 PM
4 Replies · 21 ViewsLast post 10/21/13, 5:36 PM by Bill Tindall, E.TN. -
by Larry in nw ohio 10/20/13, 2:33 PM
8 Replies · 25 ViewsLast post 10/21/13, 4:18 PM by Mark Mandell -
by Ralph Lipeles 10/20/13, 6:57 PM
5 Replies · 16 ViewsLast post 10/21/13, 11:07 AM by John McGaw -
by Bill Tindall, E.TN. 10/20/13, 7:55 PM
2 Replies · 18 ViewsLast post 10/21/13, 10:36 AM by Ellis Walentine -
by JL 10/20/13, 10:50 PM
0 Replies · 23 ViewsLast post 10/20/13, 10:50 PM by JL -
by Matt Robinette 10/19/13, 12:42 AM
2 Replies · 29 ViewsLast post 10/20/13, 2:28 PM by Matt Robinette -
by james runchey 10/20/13, 1:02 AM
9 Replies · 51 ViewsLast post 10/20/13, 1:30 PM by Steve Mackay -
by Alan Sweet 10/18/13, 4:35 PM
12 Replies · 34 ViewsLast post 10/20/13, 1:00 AM by Joseph Mulherin, sr -
by Mark Mandell 10/18/13, 7:48 PM
2 Replies · 13 ViewsLast post 10/19/13, 10:44 PM by Mark Mandell -
by John Veerkamp 10/19/13, 7:59 PM
3 Replies · 15 ViewsLast post 10/19/13, 9:55 PM by John Pappas -
by William Duffield 10/15/13, 8:53 PM
16 Replies · 36 ViewsLast post 10/19/13, 8:10 PM by William Duffield, on the Cohansey -
by Alan Young 10/18/13, 9:00 PM
3 Replies · 14 ViewsLast post 10/19/13, 12:31 AM by Alan Young -
A discussion of drawer construction wood
by Bill Tindall, E.TN. 10/16/13, 12:44 PM
11 Replies · 17 ViewsLast post 10/18/13, 11:16 PM by Merle -
Pocket hole screws; Kreg jig; questions *LINK*
by Bill Houghton 10/17/13, 9:54 PM
15 Replies · 46 ViewsLast post 10/18/13, 11:10 PM by Merle -
Continuous hinge screws - where
by Gary Smyth 10/17/13, 11:47 PM
8 Replies · 20 ViewsLast post 10/18/13, 10:01 PM by Gary Smyth -
by Stephen Kirk 10/18/13, 1:42 PM
3 Replies · 26 ViewsLast post 10/18/13, 8:26 PM by Bill Howatt -
by Stephen Kirk 10/18/13, 4:17 PM
1 Reply · 33 ViewsLast post 10/18/13, 5:27 PM by Kneale Brownson -
by Jim in N. Va 10/16/13, 7:37 PM
11 Replies · 20 ViewsLast post 10/18/13, 3:48 AM by William Duffield, on the Cohansey -
Is there an error in this? *LINK*
by Keith Newton 10/17/13, 2:30 PM
17 Replies · 60 ViewsLast post 10/18/13, 1:35 AM by Ellis Walentine -
by Alan Young 10/16/13, 6:26 PM
16 Replies · 32 ViewsLast post 10/18/13, 1:33 AM by Ellis Walentine -
by Merle 10/14/13, 2:11 AM
21 Replies · 30 ViewsLast post 10/17/13, 10:53 PM by Merle -
by Jerry Gibbs 10/17/13, 3:35 PM
2 Replies · 13 ViewsLast post 10/17/13, 8:16 PM by John McGaw -
How to use a 1/8" bit shank in a router
by Roger LeBas 10/15/13, 6:06 PM
7 Replies · 16 ViewsLast post 10/17/13, 4:06 PM by Roger LeBas -
by Richard McComas 10/17/13, 10:39 AM
4 Replies · 16 ViewsLast post 10/17/13, 2:26 PM by Ellis Walentine -
by Joseph Mulherin, sr 10/15/13, 9:26 PM
3 Replies · 14 ViewsLast post 10/17/13, 12:01 PM by del schisler -
[AD] Klingspor's 13th Annual Extravaganza! *LINK*
by Ellis Walentine 10/16/13, 12:24 PM
0 Replies · 22 ViewsLast post 10/16/13, 12:24 PM by Ellis Walentine -
WC Weekend Accomplishments....
by Dennis E Peacock 10/14/13, 12:41 PM
7 Replies · 29 ViewsLast post 10/16/13, 8:02 AM by Bryan Cowing -
by Joe shelton 10/15/13, 6:40 PM
3 Replies · 13 ViewsLast post 10/15/13, 9:40 PM by Joe shelton -
by John in NM 10/15/13, 1:29 AM
3 Replies · 16 ViewsLast post 10/15/13, 4:36 PM by John in NM -
Tinting Poly follow on to banister question
by Dustmaker Mike 10/14/13, 11:51 AM
4 Replies · 27 ViewsLast post 10/15/13, 4:35 PM by Mark Mandell



