Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Continuous hinge screws - where

Posts

Continuous hinge screws - where

#1

Continuous hinge screws - where

Gary Smyth

Anyone know where I can locate reasonably small quantities of flat head screws to fit continuous hinges? They appear to be phillips head, 1/2 x # 4 or #5 with threads all the way up the shaft to the head. Standard wood screw heads do not lay flush and the empty unthreaded shaft portion is not helpful. Branded companies that make the hinges -- Stanley, National, Amrock. Hillman, and then Lee Valley hardware tell me that they don't carry the screws as a separate item. I need boxes of 250 - 500 in brass, stainless, chrome. The web has some but in minimum quantities of 40,000.

Re: Continuous hinge screws - where

#2

Re: Continuous hinge screws - where

Robby Wright - San Marcos, CA

Gary - Check your local fastener supply. I found that small FH sheet metal screws work well and you can get them in 100's, 500's and 5000 or similar quantities. They are usually priced less than big box stores too.

Robby Wright

San Marcos, Ca

Re: Continuous hinge screws - where

#4

Re: Screws

Larry in nw ohio

Try McMaster carr, I`m going out for awhile but when I get back I could look them up. Larry

Re: Continuous hinge screws - where

#5

Re: Continuous hinge screws - where

del schisler

check this site i buy from them, this is the cheepest i have found, just do a search for more screw's

http://craft-inc.myshopify.com/products/2-wood-screw

Re: Continuous hinge screws - where

#6

Re: follow up post

del schisler

a follow up 500 #2 are $7.79 they have other's tho do a search for fastners on the right side and than scroll down for the number of screw size

Re: Continuous hinge screws - where

#7

Re: Continuous hinge screws - where *LINK*

Jim Dillon

Gary, try Woodworkers Hardware. They offer flat- and oval-head Phillips screws in a variety of finishes. They sell boxes of 100 and 1000 and also offer volume discounts. I've dealt with them before and gotten excellent service. Their catalog is worth having on hand. Hope this helps. Jim


Flat Head Phillips Screws

Re: Continuous hinge screws - where

#8

Re: Continuous hinge screws - where

Dave Bair

Lee Valley

Re: Continuous hinge screws - where

#9

They were 1st call, they said no.

Gary Smyth

McFeeley's, Restoration Hardware, and Woodworker's Hardware are sending samples as head diameter is less than typical 1/2 x 5 full thread screw. If good, larger order will happen.