Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

How to use a 1/8" bit shank in a router

Posts

How to use a 1/8" bit shank in a router

#1

How to use a 1/8" bit shank in a router

Roger LeBas

Hello,

I know if there is anyone who will know how to solve my problem, they will be on this site.

I do cnc engraving. I use a porter cable router with a 1/4" collet. I need to use 1/8" ball end mill in the router for the engraving. I know of no way to insert a bit with a 1/8" shaft in the router and have it to run true, without any wobble. I know there are other bits that can be used, but I find the 1/8" ball end mills work best for my use, and hope that I can find a fix for my problem. I have tried using a drill chuck to hold the bit, wobble, wobble, wobble.

If there is someone out there who knows how to solve this problem for me, would you please let me know.If some needs more information, I will be happy to supply it.

Thanks,

Roger

Re: How to use a 1/8" bit shank in a router

#3

Here's what you need... *LINK*

John in NM

I used to use these for 1/2" to 1/4" when I only had the one big router and no 1/4" collet for it.


Reducing bushing

Re: How to use a 1/8" bit shank in a router

#4

Re: How to use a 1/8" bit shank in a router

Bill Houghton, Sebastopol, CA

Some years back, I got an adapter sold by Rotozip (now owned by someone or other) - 1/4" outer diameter, 1/8" inner diameter, bit held in place by setscrew. Worked well for the few times I used it. The reducing bushings Yonak and John suggest are probably superior concepts; I mention this only if you need it immediately/can't wait for shipping - you might well be able to find the Rotozip thingie at a local home improvement center/big boxy store.

Re: How to use a 1/8" bit shank in a router

#5

Re: How to use a 1/8" bit shank in a router

Dave Bair

Buy or make a router-type base for your Dremel-style tool.

Re: How to use a 1/8" bit shank in a router

#6

Re: How to use a 1/8" bit shank in a router

RobCarr

I would use this combination...

Dremel Variable-Speed Rotary Tool

http://www.amazon.com/exec/obidos/ASIN/B002L3RUW0/awh

Dremel Plunge Router Attachment

http://www.amazon.com/exec/obidos/ASIN/B0000DEZK4/awh

Re: How to use a 1/8" bit shank in a router

#8

Re: How to use a 1/8" bit shank in a router

Roger LeBas

I would like to thank everyone who replied to my "request for information message about router inserts".

The responses were fantastic. I received great information, and I have ordered some inserts, which should solve my problem.

Thanks everyone.