Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Is there an error in this? *LINK*

Posts

Is there an error in this? *LINK*

#1

Is there an error in this? *LINK*

Keith Newton

I was just looking at an ad for a laser level from Lee Valley which showed on the top of the page here. While I think it would be a useful tool for me, I was wondering about the accuracy of this statement. I have not put a pen, or calculator to it, but hope the tool is more accurate than this statement.

* Specifications: it automatically levels within a range of ±3°, is accurate to ±1.5mm at 5m (approximately 1/16" at 16.4'), and has a working range of 10m (about 32.8').

Here is a link to the tool. I was just wondering if any of you have tricks that you can use in your head, to calculate this? This probably should have been over in the puzzler section, but there may be a little useful lesson in this.


http://www.leevalley.com/US/wood/page.aspx?p=71143&cat=51&ap=1

Re: Is there an error in this? *LINK*

#2

Re: Is there an error in this?

Henry Higginbotham

What are you seeing that I don't see? The metric-to-imperial numbers check out, 10 meters sounds like a reasonable maximum working range for this class of tool, and the 3° auto-leveling range is unrelated to the other numbers.

Re: Is there an error in this? *LINK*

#3

Jason Roehl in Lafayette, IN

Re: Is there an error in this?

Jason Roehl in Lafayette, IN

The "automatically levels within a range of +/- 3º" is about how far the internal pendulum can swing to self-level the beam, not about the accuracy of the beam.

1/16" in 16' sounds about right for an $80 tool--pretty much has to do with the width of the beam at that distance.

I have a very similar laser tool, only without all the goodies, and the vertical and horizontal beams project from a single window on mine. Instead of a tone, mine will flash the beam until the pendulum stabilizes to let me know that the beam is not vertical/horizontal.

One downside to this style of laser is that you can't project a beam onto a surface from an angle--because it will produce a curved line.

Jason

Re: Is there an error in this? *LINK*

#4

Ellis Walentine

It could be clearer

Ellis Walentine

Yeah, at first glance, it looks like it is only accurate to ±3º of level, which would make it about useless. But, 1/6" in 16.4 ft. is much more respectable. What I read is that it automatically levels itself if you get it within ±3º of level, by means of some internal peduulum mechanism. Maybe someone from LV will chime in with a clarification....

Cheers,

Ellis

Re: Is there an error in this? *LINK*

#5

Re: Is there an error in this?

Rob Lee

Hi,

Stuck in an airport...so have limited access. Have someone looking into this...and will post again when I have facts...

I used one of these to level my cottage a few weeks ago...I'm buying one!!

Cheers,

Rob

(I think Ellis had the right answer.....)

Re: Is there an error in this? *LINK*

#6

Re: Is there an error in this? *LINK*

Dick Coers

1.5mm in 5 m is .017 degrees


trig calculator

Re: Is there an error in this? *LINK*

#7

Re: Is there an error in this?

Keith Newton

A circle with a radius of 59 5/16" or any other increments will have circumference of 360 of that unit of measure. Using inches, then round that off to 5', one inch ~= 1º, so at 16', those ±3° sounds like it could be about 10" on either side of plumb or level.

I'm guessing it should read ±.03°.

I'm sure it is a great tool, and I wish I had one. The first time I used a laser level, was about 20 years ago, to mark a new waterline on a J24 sailboat that we had ground out blisters, then did a major fairing job to improve the performance of our racing campaign.That sure made it easy, but back then, it would have cost several thousand bucks.

Re: Is there an error in this? *LINK*

#8

Unrelated but....

basil

I had a rotating, self leveling laser that was part of an automatic grading system on my motor grader. Every once in awhile I'd take it to a large pond on an absolutely windless day and check it for accuracy. Nothing gets more level than standing water.

I've seen old carpenters use garden hoses to level houses, etc. by checking the water level in each end of the hose. I guess if you wanted to check a level over a distance as short as 16 feet you could use a piece of lumber 16 foot long and the garden hose method.

Re: Is there an error in this? *LINK*

#9

Jason Roehl in Lafayette, IN

You're still on the wrong track.

Jason Roehl in Lafayette, IN

The +/- 3º is correct, but as Ellis said, it's not totally clear that this DOES NOT APPLY TO THE ACCURACY.

If you set the laser on a platform that is 2º out of level, it will project a level/plumb beam (within 1/16" over 16.4').

If you set the laser on a platform that is 4º out of level, it will NOT project a level/plumb beam, but will warn you in some way that it cannot self-level, until you get the platform it's on closer to level.

Jason

Re: Is there an error in this? *LINK*

#10

Jason Roehl in Lafayette, IN

Re: Unrelated but....

Jason Roehl in Lafayette, IN

I've used a tube-and-water method before. I used clear tubing, though--you mark the water level on both ends after filling it (I used a tube that was too small--very hard to fill quickly and get all the bubbles out). As long as both ends remain open, the two water lines will be at the same level (and both ends are in the same air pressure, of course).

Jason

Re: Is there an error in this? *LINK*

#11

Re: I used the tube and water-.

Larry Clinton At Frankfort, (Central) Indiana

method first time about 50 years ago to level the first home I built - (64"foot long as I remember). I also used it to level the foundation of my current shop. As far as I know there is no more accurate method - period.

Re: Is there an error in this? *LINK*

#12

Thanks Jason and Ellis.

Keith Newton

it is easier to understand how you have explained it. Maybe it should read,

* Specifications: it automatically levels "when set up" within a range of ±3°, is accurate to ±1.5mm at 5m (approximately 1/16" at 16.4'), and has a working range of 10m (about 32.8').

Re: Is there an error in this? *LINK*

#13

Ellis wins.....

Rob Lee

The 3 degrees refers to the range of motion of the pendulum....!

The writer feels shame.......

Rob

(Sitting in Philly airport)

Re: Is there an error in this? *LINK*

#14

Navin, tell him what he's won!

Henry Higginbotham

Anything . . . in this general area, right in here. Anything below the stereo and on this side of the Bicentennial glasses--anything between the ashtrays and the thimbles. Anything in this three inches, right in here in this area that includes the Chiclets, but not the erasers.

Sorry. Slow day--couldn't resist. :D

Re: Is there an error in this? *LINK*

#15

Re: I used the tube and water-.

Jerry Nicholson

I used the water level method to level a pool table about 50 years ago. They guy I bought the table from thought I was a genius. He didn't realize how long that method of leveling had actually been around.

Jerry

Re: Is there an error in this? *LINK*

#16

What a "Jerk"

Grant in Iowa

And I mean that in the nicest possible way.

It's a quote from "The Jerk" with Steve Martin. He then sends a letter to his mother, in which he says:

"Frosty, my boss, told me there's a big future in weight guessing.

"Enclosed is $4.75 for my loving family.

"P.S. Is grandma still farting?"

Re: Is there an error in this? *LINK*

#17

Ellis Walentine

We used it to install a suspended ceiling


Re: Is there an error in this? *LINK*

#18

Ellis Walentine