General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Cody Lewis 3/5/14, 5:28 AM
5 Replies · 44 ViewsLast post 3/6/14, 2:30 AM by craigd -
by Yonak 3/5/14, 3:24 PM
1 Reply · 23 ViewsLast post 3/6/14, 1:14 AM by Sergio -
Half round table - a little more progress
by Joe 3/5/14, 2:32 PM
1 Reply · 23 ViewsLast post 3/5/14, 2:42 PM by Tony - Memphis -
WC Weekend Accomplishments....
by Dennis E Peacock 3/3/14, 2:21 PM
8 Replies · 34 ViewsLast post 3/5/14, 1:28 AM by Jack Guzman from Maine -
by Stephen Shepherd 3/4/14, 6:46 PM
0 Replies · 32 ViewsLast post 3/4/14, 6:46 PM by Stephen Shepherd -
Half round table - a little progress
by Joe 3/3/14, 1:57 PM
4 Replies · 24 ViewsLast post 3/4/14, 5:21 PM by Jesse Cloud -
by Tom 3/4/14, 1:07 PM
4 Replies · 23 ViewsLast post 3/4/14, 4:06 PM by John McGaw -
Metal Bracket for Tripod Pedestal Table
by Joe Burke 3/2/14, 7:36 PM
9 Replies · 55 ViewsLast post 3/4/14, 3:43 PM by Joe Burke -
Last Project for Mom.... R.I.P.
by Tim Greif - West of Chicago 3/1/14, 5:48 PM
14 Replies · 36 ViewsLast post 3/4/14, 2:32 PM by Thomas Skaggs -
by Barry Irby 3/1/14, 7:18 PM
10 Replies · 33 ViewsLast post 3/3/14, 11:53 PM by Grant in Iowa -
by Dave Matchett 3/3/14, 7:03 PM
4 Replies · 31 ViewsLast post 3/3/14, 9:12 PM by Joe -
by Tony - Memphis 2/28/14, 3:37 PM
2 Replies · 20 ViewsLast post 3/3/14, 3:29 PM by PaulGrover -
Does this seem overpriced to you *LINK*
by John Lucas 2/28/14, 3:28 PM
11 Replies · 40 ViewsLast post 3/2/14, 10:23 AM by Tom -
by Joel Weber 2/27/14, 10:59 PM
9 Replies · 31 ViewsLast post 3/1/14, 10:23 PM by Joel Weber -
by Doug Ridley 3/1/14, 8:55 PM
0 Replies · 35 ViewsLast post 3/1/14, 8:55 PM by Doug Ridley -
by GolfSteve in Calgary 2/28/14, 4:08 AM
9 Replies · 32 ViewsLast post 3/1/14, 7:23 PM by William Duffield, on the Cohansey -
Any advice on how to cut this joint?
by Joe 2/27/14, 1:56 PM
16 Replies · 41 ViewsLast post 3/1/14, 2:01 PM by Barry Irby -
cutting boards- 2 different cherries
by Bill Tindall, E.TN. 2/28/14, 5:54 PM
5 Replies · 26 ViewsLast post 3/1/14, 5:14 AM by GolfSteve in Calgary -
by John Lucas 2/28/14, 2:05 AM
5 Replies · 35 ViewsLast post 2/28/14, 3:56 PM by Bill Houghton -
Resawing blade choice question
by DLCinSTL 2/27/14, 5:58 PM
8 Replies · 41 ViewsLast post 2/28/14, 12:52 PM by del schisler -
by Tom 2/27/14, 8:58 PM
1 Reply · 28 ViewsLast post 2/28/14, 12:40 PM by del schisler -
WC Weekend Accomplishments....
by Dennis E Peacock 2/24/14, 1:48 PM
13 Replies · 31 ViewsLast post 2/28/14, 2:27 AM by Keith Newton -
by Alan Young 2/25/14, 3:29 PM
8 Replies · 38 ViewsLast post 2/27/14, 11:47 PM by Mark -
Samantha's dresser 10- sawing veneer problems
by Bill Tindall, E.TN. 2/26/14, 2:29 PM
14 Replies · 47 ViewsLast post 2/27/14, 4:58 PM by Bill Tindall, E.TN. -
by Tony - Memphis 2/26/14, 5:04 PM
7 Replies · 73 ViewsLast post 2/27/14, 2:47 PM by Tony - Memphis -
by DizD 2/26/14, 1:37 AM
2 Replies · 60 ViewsLast post 2/26/14, 10:05 PM by DizD -
OT - Stiffening Round Posts Along Driveway
by don stephan 2/24/14, 1:32 PM
16 Replies · 34 ViewsLast post 2/26/14, 3:31 PM by Don Orr -
by don stephan 2/21/14, 1:04 AM
14 Replies · 58 ViewsLast post 2/26/14, 1:36 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Randy Stukenberg 2/24/14, 9:31 PM
6 Replies · 163 ViewsLast post 2/26/14, 12:43 PM by Stuart Johnson -
vertical v. horizontal wood storage
by Ronster 2/19/14, 11:24 PM
18 Replies · 48 ViewsLast post 2/26/14, 12:00 AM by Tom



