Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

benchtop band saw

Posts

benchtop band saw

#1

benchtop band saw

Cody Lewis

It's been quite awhile since I've been to these message boards. Good to be back. After quite a long period of time that didn't give me much opportunity to do wood projects, I'm back in the saddle a bit. I'm wanting to purchase a benchtop band saw. I bought a SKIL brand band saw and the quality is not what I was hoping, so I've returned it. I'd rather spend more and get something quality (that actually has a flat table to it). I've always received such great advice here. What would you all suggest? Which brands can I rely on?

Re: benchtop band saw

#2

craigd

Re: benchtop band saw *LINK*

craigd

I got a Craftsmen/Rikon 10" for $150(?) shipped to complement my 16" and find it very handy - it sits under the bench, I pull it out, sit on the floor and cut away. Quicker than grabbing a hand saw. I'm a bit dubious about the lower wheel adjustment but haven't had to muck with it. I'm still on the stock blade, it works mostly OK if you stone it (hold stone to the blade and manually rotate the blade backwards); makes it much smoother. It is pretty gutless through. Table is cast iron, table holder is cast AL (ho hum), fence is garbage but works enough I haven't replaced it.

Highland hardware regularly has them for $200 sans shipping.


http://www.highlandwoodworking.com/rikon10bandsaw.aspx

Re: benchtop band saw

#3

Re: benchtop band saw

John Lucas

I only have experience with the Rikon, no other small machine. I tried to tune up the one they had at John C Campbell folk school and even with all the experience I have tuning up bandsaws that one was a pain in the butt. I would not recommend it. Maybe the one I used had a problem of some sort but it just seemed cheaply built and trying to get the blade to stay on the wheels was a pain.

Surely there are better saws out there

Re: benchtop band saw

#4

The Rikon is the best at that price point.

Dick Coers

But they aren't much of a machine. What? Less than $200 and it's not much of a bandsaw? Why would we expect much of a machine for that money, you get what you pay for. Buying woodworking machinery isn't getting any easier. Seems like the glory years are over. Cheaper manufacturing and company ownership shuffles are really doing some damage.

Re: benchtop band saw

#5

Re: benchtop band saw

Cody Lewis

Thanks for the replies. My experience with the $100-225 band saws has not been good. So I think I'm going to focus on a benchtop that a step or two up from that. I'm expecting it would be $300-$500, but I know some brands have more value than others. Anyone have experience with the Jet benchtops? I love my Jet cabinet table saw.

Re: benchtop band saw

#6

craigd

Re: benchtop band saw

craigd

When I was looking for low cost small bandsaws, I considered the Jet but the reviews I found put it on a par with the Rikon (or not that much better for much more $). If you have $ to burn, there are some very nice small bandsaws out there and some old iron I'd love to have. I seem to remember close to the price of 14" saws (for new).