cutting boards- 2 different cherries
Bill Tindall, E.Tn.
The darker board was made from cherry that grew at lower elevation here in E. TN. The lighter is northern cherry. These differences in color are characteristic of cherry from these two locations.
The pattern was created by slicing off 1 " pieces from 8/4 cherry plank. The short edge of each piece is consecutively numbered as they are sliced. (Number the edge that will be the outside edge of the board so you can see the numbers in the next step) Line up the even numbered pieces in one column to make a rectangle(one side of the board) and the odd in another. Glue the pieces in each column together and after the glue is dry glue the columns together. Round edges, sand and slather in any vegetable oil.
These boards will be door prizes at some classes I am teaching in Burrr, freeze! Chicago. I have crocus blooming here at the house.



