Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

OT Opening Combination lock

Posts

OT Opening Combination lock

#1

OT Opening Combination lock

Barry Irby

Someone gave my friend a cable lock that has a combination lock on it. Its the sort of thing you might use to lock your bike to a tree. He does not know the combination. His packrat gene is twitching and he is determined to open it. (We know this is stupid, but what can I say?) My question is, Is there a trick to doing this? The lock has four tumblers that are numbered from 0 to 9. So there are 10,000 possible combinations. He has started at 0001 and is working his way up. He is using it like a stress toy and fiddles with it while on the phone or whatever. If he works his way up to 9999 he is bound to hit it, right?

Re: OT Opening Combination lock

#2

don't forget 0000


Re: OT Opening Combination lock

#3

Re: OT Opening Combination lock

John Lucas

I did that once. I was bound and determined to figure it out. So each night for several nights I would sit there while watching TV and just count on the thing. Eventually got it open. Hopefully his will have a starting number below 5000.

Re: OT Opening Combination lock

#4

Re: OT Opening Combination lock *LINK*

Jesse Cloud

If its a "Master Lock" brand, the link below should work.


crack a master-lock

Re: OT Opening Combination lock

#5

Easy

Mark Hennebury

Gently pull apart the cable, it will put side pressure on the tumblers,

Turn the first tumbler until the side pressure disappears and the tumbler will feel loose, then do the next one and then the next when you get to the last one it will open.

Works on all of this type of lock.

Re: OT Opening Combination lock

#6

Re: OT Opening Combination lock

Lee Schierer in McKean, PA

I opened a sesame combination lock years ago by dialing in one number at a time. It took weeks.

Lee

Re: OT Opening Combination lock

#7

Re: OT Opening Combination lock

Tom

If it is the one where the inside piece looks like a key, sometimes you can figure out how is set by watching if one of the bands wiggles more than another when you pump the key in and out. This is because it is cheap and the parts are not blueprinted to have a perfect bearing. Another tell would be if one of the bands is harder to turn when you pull on the key (male end). So if you can see anything like that, just keep turning that given band through the numbers one at a time, until you find one position where the band does not wiggle because it is not bearing on the key in that position. Then leave that where it is , and start on the next most wiggly or sticky band.

Re: OT Opening Combination lock

#9

Correct

Rick Christopherson

The weakness of this type of lock is that the bolt acts on the tumblers when pulled against. The better quality locks are tougher to do, but the cheap ones can be unlocked in about 20 seconds.

Re: OT Opening Combination lock

#10

Re: 10,000 combinations....

Mark Nowicki

....and if Barry's friend can work through 10 combinations per minute it will take 1667 minutes or 28 hours or 4 working days (with an hour off for lunch each day)

Assuming the cost of a new lock of $10, Barry's friend (if he does get it open) will "earn" 37 cents per hour.

Mark

(who is really bored this Sunday morning)

Re: OT Opening Combination lock

#11

And...

Grant in Iowa

Human nature is to change the lock code on a 4 digit lock to a significant year. Try about 1900 through 2020, and odds are it is in that range. This assumes of course that it is of the type that can be changed by the user.

Regards,

Grant in Iowa