Turning
Lathe work, tools, techniques, projects.
Related: Turning archive
Topic list
-
TopicStatisticsLast post
-
Link how I make a burl Tree +Progress
by Terry Scott 9/20/10, 8:50 AM
5 Replies · 23 ViewsLast post 9/21/10, 7:35 PM by Terry Scott -
by Leo Cuellar 9/21/10, 2:51 PM
0 Replies · 11 ViewsLast post 9/21/10, 2:51 PM by Leo Cuellar -
by adrien 9/21/10, 2:20 PM
0 Replies · 19 ViewsLast post 9/21/10, 2:20 PM by adrien -
*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*
by Ellis Walentine 9/18/10, 12:01 PM
21 Replies · 60 ViewsLast post 9/21/10, 5:16 AM by Reed Gray -
by Mike Foster 9/20/10, 4:24 AM
20 Replies · 26 ViewsLast post 9/21/10, 3:11 AM by Bill Houghton -
by Dick Hines 9/20/10, 1:11 PM
4 Replies · 20 ViewsLast post 9/21/10, 2:00 AM by Carole Valentine -
The Chinese Balls of Claude Lethiecq
by AndiWolfe 9/18/10, 8:48 AM
6 Replies · 75 ViewsLast post 9/20/10, 10:56 PM by Keith Tompkins -
by charlie belden 9/20/10, 6:17 PM
0 Replies · 15 ViewsLast post 9/20/10, 6:17 PM by charlie belden -
I may be mad but I am not Crazy Burl Tree 4 Progre
by Terry Scott 9/19/10, 6:16 AM
15 Replies · 62 ViewsLast post 9/20/10, 4:05 PM by Don Orr -
by john lucas 9/19/10, 11:15 PM
2 Replies · 13 ViewsLast post 9/20/10, 3:15 PM by John Lucas -
by Bill Youngblood 9/18/10, 10:27 AM
15 Replies · 42 ViewsLast post 9/20/10, 2:56 PM by Steve Mushinski -
29 Replies · 67 ViewsLast post 9/20/10, 2:25 AM by Keith Tompkins
-
by Grant Wilkinson 9/19/10, 11:37 PM
1 Reply · 20 ViewsLast post 9/20/10, 1:53 AM by Steve Kubien -
by john lucas 9/19/10, 8:17 PM
0 Replies · 21 ViewsLast post 9/19/10, 8:17 PM by john lucas -
by Terry Scott 9/18/10, 12:03 PM
11 Replies · 37 ViewsLast post 9/19/10, 7:58 AM by Terry Scott -
The mystery of the expanding hole
by David Walser 9/16/10, 5:11 PM
6 Replies · 24 ViewsLast post 9/19/10, 12:54 AM by David Walser -
[AD] Thompson Gouge Handles -- Special Offer! *LINK*
by Ellis Walentine 9/18/10, 6:41 PM
0 Replies · 13 ViewsLast post 9/18/10, 6:41 PM by Ellis Walentine -
by D. Hansen 9/17/10, 12:27 PM
7 Replies · 21 ViewsLast post 9/18/10, 4:01 PM by steven antonucci -
Hoarding or Potential Inspirations?
by charlie belden 9/16/10, 3:35 AM
3 Replies · 21 ViewsLast post 9/18/10, 1:07 PM by George Van Beynen -
LED Light Magnifyer For PM 3520???
by George Guadiane 9/17/10, 1:57 PM
5 Replies · 25 ViewsLast post 9/18/10, 11:57 AM by Don Evans -
by Dick Hines 9/16/10, 7:39 PM
8 Replies · 15 ViewsLast post 9/18/10, 2:29 AM by Chuck Jones -
by Terry Scott 9/17/10, 10:10 AM
2 Replies · 16 ViewsLast post 9/18/10, 1:38 AM by Terry Scott -
Anyone try making flap sanders?
by steven antonucci 8/25/10, 3:09 AM
13 Replies · 40 ViewsLast post 9/17/10, 8:57 PM by steven antonucci -
by John Lucas 9/16/10, 7:44 PM
3 Replies · 14 ViewsLast post 9/17/10, 3:14 PM by Matt Overton -
Pulleys frozen onto motor shaft - How to move? *LINK*
by Henry (Raleigh, NC) 9/16/10, 3:25 PM
14 Replies · 57 ViewsLast post 9/17/10, 1:42 PM by Bill Turpin -
by Terry Scott 9/13/10, 9:13 AM
23 Replies · 54 ViewsLast post 9/17/10, 9:47 AM by Terry Scott -
*** CHAT TONIGHT -- 9:30 EDT ***
by Ellis Walentine 9/15/10, 1:35 PM
8 Replies · 39 ViewsLast post 9/17/10, 12:47 AM by karl jr -
by Ray - Middletown, IN 9/14/10, 12:32 AM
6 Replies · 25 ViewsLast post 9/16/10, 10:53 PM by Carol Reed, Strawberry, AZ -
by Dick Coers 9/12/10, 2:22 AM
12 Replies · 37 ViewsLast post 9/16/10, 10:41 PM by Carol Reed, Strawberry, AZ -
Finished cradle (cross posted on Messages board)
by JL 9/15/10, 10:52 PM
0 Replies · 18 ViewsLast post 9/15/10, 10:52 PM by JL



