Plain Bowl
Terry Scott
One of the Categories at the Franklin arts just held was plain bowls
This piece of Coolibah burl cap is quite a bit bigger than the picture portrays
At 550mm long The burl was turned to a 4mm thickness through out
The bead serves a couple of purposes, one to add a bit of stability to the bowl to stiffen it up and two to draw the eye.
As this was a plain bowl I didn�t risk turning and carving my characteristic 3 feet so the bowl sits on a ring foot which is quite high to give the wings lift
Sanded to 1200 grit with organ oil to bring out the colour then lacquered
The wood was very hard and came off in chips so to get a finish I had to wind up the speed so my trusty skew on its flat gave of a very thin shaving
To prevent flex I hot melt glued struts onto the back while cutting the front side
I was well pleased as this piece snuck in to win first place in this category
Comments welcome (sorry about the gloat )





