Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Anyone try making flap sanders?

Posts

Anyone try making flap sanders?

#1

Steven Antonucci

Anyone try making flap sanders?

steven antonucci

I have an idea that will require a lot of different grits and I want to make a "quick change" flap sander where the paper can be changed when it gets spent...

Anyone do this already so I don't have to put a million brain cells on the job?

Steve

Re: Anyone try making flap sanders?

#2

Re: Anyone try making flap sanders?

Terry Scott

Hi Steve

I have a swag of flappers Ive made

What I do is get a threaded rod and super glue a nut and washer about 6mm down from the end

Then cut cloth backed paper in strips stack a half dozen bits of the strips on top of each other then drill a hole

Place over the rod and place another washer and nut on top Alternate the paper back to back


Re: Anyone try making flap sanders?

#3

Steven Antonucci

Third one from the left

steven antonucci

is what I am looking to make a gaggle of... yours looks commercial? I want to be able to replace the paper as it wears and change grits as I progress...

Any ideas, folks?

Re: Anyone try making flap sanders?

#4

Re: Third one from the left

Jeff Willaford

Never made one myself but check flap-wheels.com. They have flappers with replaceable paper. No affiliation, no endorsement, just saw the banner ad on WC marketplace.

Re: Anyone try making flap sanders?

#5

Steven Antonucci

look at the prices!

steven antonucci

They are perfect except for the prices!

Good for design ideas though... Thanks!

Steve

Re: Anyone try making flap sanders?

#6

Re: Anyone try making flap sanders? *LINK*

Stuart Johnson

Eugen Schlaak has a write up in the file cabinet on WOW. I couldn't upload it here. If you don't have WOW access I'll send you a copy. I would post a link to my web page but I can't figure out how to unblock the directories so others can see files or pages :\ If I can figure it out I'll post a link.

figured it out I think.


Flap Sander

Re: Anyone try making flap sanders?

#7

Steven Antonucci

Very helpful, thanks!

steven antonucci

I was definitely overthinking the issue...

S

Re: Anyone try making flap sanders?

#8

Leo Cuellar

Re: Anyone try making flap sanders? *LINK*

Leo Cuellar

I just happened to run across this product on youtube this morning. I am not affiliated with/have any connection to this product. I also have not used this product so can't vouch for it either. Just thought it might be of interest to you.

Leo


http://www.youtube.com/watch?v=3ADuxNHo7wY

Re: Anyone try making flap sanders?

#9

That and his other 3 are kinda cool.. 

Randy Gleckler

Re: Anyone try making flap sanders?

#10

Steven Antonucci

Interesting design

steven antonucci

it wouldn't work for what I needed it for, but it would if the loops were smaller and on the outer round instead of the face.

I have to go back to that piece to finish it. I might mock up a prototype today.

S

Re: Anyone try making flap sanders?

#12

Dennis in Southern Oregon

Re: Anyone try making flap sanders?

Dennis in Southern Oregon

Steve,

You might want to try my hi-tech system (patent pending). ;)

Dennis

Re: Anyone try making flap sanders?

#13

Steven Antonucci

Still no good....

steven antonucci

I need something a little less aggressive than a wire wheel and a little sturdier than a standard flap wheel (which disintegrated in my application). I am not doing this thing by hand!

S

Re: Anyone try making flap sanders?

#14

Steven Antonucci

promising...

steven antonucci

Now, can I fabricate something like that? Hmmm. ideas...