Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

I may be mad but I am not Crazy Burl Tree 4 Progre

Posts

I may be mad but I am not Crazy Burl Tree 4 Progre

#1

I may be mad but I am not Crazy Burl Tree 4 Progre

Terry Scott



I have made three in this series and each customer that brought the pieces has been pestering me to make another I finally found some more branches with burls on about 6 months ago .

As they say you have to be in the mood

today was the day

So far 12 hours but I was having fun pushing my Boundaries once again

As you can see I only just had clearance to turn this sucker

The time is in each set up ,some would say why not just carve the thing,but that is not my thing If it can fit on my lathe Ill turn it

Counter balance is important and making sure the straps are tight as I turn these just on the fast side as the cut is easier

So you can call me mad if you like but I am not crazy as you can see this is the forth

One thing I dont have to worry about soon is someone plagiarizing L.o.l

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#2

Steven Antonucci

I can't imagine how you'd get enough strap tension

steven antonucci

to safely hold the piece. I assume the 2x stock propping it up is screwed into the burl log in areas you will carve away?

You are pretty safe from being copied. None of us would even want to be in the same room with that thing spinning, let alone the guy at the lathe with the tool in his hand! LOL

Steve

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#3

Bill Blasic

Re: I can't imagine how you'd get enough strap ten

Bill Blasic

Terry,

Mad not crazy, fair enough! Just cannot imagine attempting this, amazing.

Bill

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#4

I am not sure about New Zealand, but

jake Niedling

I think Mad and Crazy would apply here in the USA. :D I am an engineer by training and just shake my head everty time I see your mounting. Very creative and enjoyable to see how you are doing it. I really enjoy your posts and glad you share it with us here on Wood Central.

Jake

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#5

Safety Attire?

Al Kapocius

Presume that you wear prespotted polka dot shorts when turning.

Al Kapocius

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#6

Re: I am not sure about New Zealand, but

Barry L Elder

Bodacious!

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#7

Re: I may be mad but I am not Crazy Burl Tree 4 Pr

john lucas

Terry One of the first turners I learned about after I met John Jordan was Stoney Lamar. He was and I still is famous for his off center work that often doesn't even look turned. I remember he used a giant faceplate like you do and had chains, cables and straps bolted on to hold the pieces. He also used lead weights screwed on to counter balance everything.

I've only done it a few times over the years but never to the extent that you and Stoney do. I think you have taken it to the next level with the bowl and burl pieces. Those are really cool.

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#8

Re: Safety Attire?

Donna Banfield

Al, now that there is funny...I don't care who you are! (to quote a famous redneck cable guy).

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#9

Re: I can't imagine how you'd get enough strap ten

Terry Scott



Steve The straps are that tight you can play a tune

To tension them I call it walking the strap

I just keep placing in tek screws towards the work and the screws tension the strap

The webbing is good to use as the screws dont pull through

The wedges are placed on to form a cradle

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#10

Re: Safety Attire?no

Terry Scott

No but they do have a few brown stains l.o.l

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#11

Re: I am not sure about New Zealand, but

Terry Scott

Jake I have a set step plan and follow it religiously Every step is checked 3 times any doubt at all and I start again

My heart used to get a workout and Id grind my teeth but know I have done enough of this type of turning that the challenge is enjoyable

The enjoyment comes from designing new works were no man has gone before l.ol

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#12

Re: I may be mad but I am not Crazy Burl Tree 4 Pr

Terry Scott

John one of the ideas I am working on is a large platter the face will be turned with hollow forms and small bowls to represent the moons surface

I had 3 pieces on the lathe so far and ended up with designer fire wood each time

I will need to turn this burl tree between centers after the bowls /trumpets are complete balancing that will be interesting

I should thank Rob Cadaye as I wouldn't be doing this kind of thing without my Stubby 1000

Just cannot seem to break the thing

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#13

JL

Base wood?

JL

What do you use? Obviously there are a LOT of screw holes in your face plate wood. I'm curious as to which wood you might use for all the repeated use.

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#14

Re: Base wood?

Terry Scott

Mdf I glue 2 20mm sheets together

If you use ply when the screw are taken out they peel off layers of ply

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#15

Leo Cuellar

Love it! Love it!! Love it!!!

Leo Cuellar

and I thought I was living dangerously trying my first 3 cornered hollow form last night. :D

Re: I may be mad but I am not Crazy Burl Tree 4 Progre

#16

Awesome!

Don Orr

"You are pretty safe from being copied. None of us would even want to be in the same room with that thing spinning, let alone the guy at the lathe with the tool in his hand! LOL "

I don't know about that Steve-I'd love to be there and see it in action and maybe even give it a try. I've never claimed to be entirely sane though.

Thanks Terry for the photos of how you do what you do so well.