General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by tom norton 1/26/08, 3:04 AM
0 Replies · 31 ViewsLast post 1/26/08, 3:04 AM by tom norton -
by Thomas S Stockton 1/24/08, 2:10 PM
10 Replies · 35 ViewsLast post 1/26/08, 1:50 AM by Johanna -
by Tim Caley - North Litttle Rock 1/23/08, 4:27 PM
7 Replies · 23 ViewsLast post 1/26/08, 1:32 AM by henthorn -
Happy birthday, Mr. Don Henthorn!
by Al Stokka 1/23/08, 8:44 PM
7 Replies · 24 ViewsLast post 1/26/08, 1:30 AM by henthorn -
OT 19 hours and ~20 minutes and one aw
by Dustmaker Mike 1/25/08, 5:04 PM
4 Replies · 40 ViewsLast post 1/26/08, 1:04 AM by Dustmaker Mike -
by Ron Hildreth 1/25/08, 11:34 PM
3 Replies · 35 ViewsLast post 1/26/08, 1:00 AM by Jim DeLaney, Austintown, Ohio -
by steve mackay 1/24/08, 10:37 PM
6 Replies · 36 ViewsLast post 1/26/08, 12:50 AM by Glenn Madsen, near San Francisco -
MAPP gas (yellow container) or normal propane?
by Steve Silca 1/25/08, 5:22 PM
7 Replies · 43 ViewsLast post 1/26/08, 12:29 AM by Pat Riley in SLC -
OT - Free HD TV with Rabbit Ears
by Mark Goodall - ATL - tooljunkie 1/25/08, 9:16 PM
1 Reply · 24 ViewsLast post 1/26/08, 12:12 AM by Jerry Nicholson -
Useful source for woodworkers needs
by Joseph Mulherin 1/24/08, 1:29 PM
1 Reply · 29 ViewsLast post 1/25/08, 11:34 PM by Tom Pilsbury (Chicago) -
Shop flooring from Sam's Club?
by Kurt Whitley 1/23/08, 3:55 PM
11 Replies · 44 ViewsLast post 1/25/08, 8:41 PM by Mark Goodall - ATL - tooljunkie -
Reading Your Borads- grade marks
by Bill Tindall, E.TN. 1/25/08, 6:07 PM
0 Replies · 56 ViewsLast post 1/25/08, 6:07 PM by Bill Tindall, E.TN -
need copy of old Wood magazine
by David E Whiting 1/24/08, 8:28 PM
4 Replies · 36 ViewsLast post 1/25/08, 4:25 PM by Rick Jackson,TN -
by Mark Valsi 1/24/08, 4:22 PM
3 Replies · 28 ViewsLast post 1/25/08, 4:13 PM by ScottS -
Help for Cutting Coves on Table Saw
by Kelly Handwerk 1/24/08, 6:20 PM
8 Replies · 51 ViewsLast post 1/25/08, 2:38 PM by Randy Stukenberg -
by Bill Tindall, E.TN. 1/23/08, 10:46 PM
15 Replies · 54 ViewsLast post 1/25/08, 2:20 PM by Bill Tindall, E.TN -
OT: "Instant" Hot Water *LINK*
by Ken Krawford 1/24/08, 11:37 AM
9 Replies · 43 ViewsLast post 1/25/08, 2:09 PM by Pete in Holland, MI -
by Bill Lordan, Auburn NH 1/24/08, 2:05 PM
5 Replies · 32 ViewsLast post 1/25/08, 1:22 PM by Mike Fitterling -
MDF for Painted bedside tables
by Mark McC 1/22/08, 3:13 PM
7 Replies · 33 ViewsLast post 1/25/08, 12:18 PM by Mark in Whitby -
Mortiser/ HF Cross Slide vice question
by Barry Irby 1/24/08, 6:16 PM
4 Replies · 37 ViewsLast post 1/25/08, 3:03 AM by George -
Is anybody using a Worksharp on lathe tools?
by Mark in B'ham, AL 1/22/08, 10:38 PM
3 Replies · 27 ViewsLast post 1/25/08, 1:08 AM by Michael Dresdner -
by Rick Jackson,TN 1/24/08, 11:28 AM
7 Replies · 51 ViewsLast post 1/25/08, 12:32 AM by Rick Jackson,TN -
by Eddie Pacheco; San Jose, Ca. 1/24/08, 1:18 AM
17 Replies · 52 ViewsLast post 1/24/08, 11:40 PM by Sonny Asburry -
Dust Collector follow up-- Powermatic 73?
by mkula 1/20/08, 2:25 AM
3 Replies · 45 ViewsLast post 1/24/08, 10:48 PM by Jon Grider -
Further on Stacking & Stickering
by Howard 1/24/08, 1:42 PM
9 Replies · 36 ViewsLast post 1/24/08, 9:30 PM by Barry Irby -
by Nat Robison 1/17/08, 4:51 PM
7 Replies · 81 ViewsLast post 1/24/08, 9:22 PM by Pat Barber -
by wilbur 1/23/08, 9:09 PM
7 Replies · 23 ViewsLast post 1/24/08, 8:29 PM by wilbur -
by Ernie Miller 1/24/08, 4:14 PM
5 Replies · 42 ViewsLast post 1/24/08, 7:18 PM by Clint Searl, at the base of Haycock Mtn -
by Tom Dunlap 1/23/08, 1:30 AM
7 Replies · 61 ViewsLast post 1/24/08, 5:45 PM by Tom Dunlap -
by Joe Burke 1/23/08, 9:50 PM
8 Replies · 38 ViewsLast post 1/24/08, 4:39 PM by Art Silva



