Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

MDF for Painted bedside tables

Posts

MDF for Painted bedside tables

#1

MDF for Painted bedside tables

Mark McC

>Looking to build some box like bedside tables that will be painted. I have never worked with MDF exclusively for a furniture project but I have heard and read that it takes a routed edge nicely,is stable and paints up really well.

Concerned though about its durability.

Any comments or experience about using NMDF for this type of project

thanks

Mark

Re: MDF for Painted bedside tables

#2

Re: MDF for Painted bedside tables

George@Colonel's Workshop-Havertown PA

>Good Morning Mark,

MDF can be used. The tables will paint up nicely, and MDF can be routed smooth. It is a heavy material, though. In a bedroom durability may not be an issue. For bedroom furniture, I actually prefer wood. What will you use for joinery?

George

Re: MDF for Painted bedside tables

#3

Re: MDF for Painted bedside tables

Mark Williamson

>Hey Mark,

MDF will work nicely for your bedside tables! I have used it for many different things! It does take paint very well and cuts/routes like butter! It holds a nice crisp edge! With larger projects, you may want to take in to consideration it's weight! It gets heavy real quick! LOL I built a hugh entertainment center for a customer from MDF and it turned out awesome! Once I put three coats of piant on it, you couldn't tell that it wasn't store-bought! You do have to be carefull when useing it for shelves though, it will sag if you span too far. You shouldn't have anything to worry about with small bedside tables. The price is nice too! LOL

Mark W.

Re: MDF for Painted bedside tables

#4

Re: MDF for Painted bedside tables

Nat Robison

>I agree with the previous posters. When I first got a table saw some years ago, my first little project was to build a bookcase for my daughter's room out of 2 4'x2' sheets of 3/4" MDF (shelves are dadoed into the sides). It's probably 20" wide and I haven't noticed any sag to them although none of the shelves hold more than 10-12 lbs.

I don't forsee any problems in using it for a bedside table-sized project.

Re: MDF for Painted bedside tables

#5

Re: MDF for Painted bedside tables

Dick Coers

>No one has mentioned about extra work needed to treat the end grain of the MDF. I haven't used it for years, but I always had to fill and take extra time on the endgrain because it would soak up more finish than the face. I never did like the stuff myself. Makes a dust storm when you machine it, bringing in a full 4x8 of that stuff almost takes two people, and if I wanted that kind of furniture I would go to IKEA and get it finished for about the same cost of my materials.

Re: MDF for Painted bedside tables

#6

Re: Routing & Finishing

Mark Mandell - Gone Round In Jersey

>Mark,

Two things:

1. Cutting & routing is with carbide tools only. MDF will eat HSS edges in short order. Do this outside and wear a good dust mask. The amount of dust is prodigeous and the binder is bad news.

2. MDF is a sponge on the end grain and should be sealed before painting. I've done beds in white and black lacquered MDF. I sealed the stuff with glusize which I made from Elmer's white school glue (old style) that I then tinted to my finish color; black dye and tite-nox for white. Thin with water (2 parts water to 1 glue) and apply two coats. Allow 24 hours to dry, then sand lightly to level and apply your finish. 2 coats of lacquer came up like glass. Even with a heavier body paint, you should still seal the end grain.

mm

Re: MDF for Painted bedside tables

#7

Re: MDF for Painted bedside tables

Mark in B'ham, AL

>A few years back I made a few pieces of furniture for my son's room out of 3/4 MDF. I echo what everybody else has said about the dust, but I didn't have much trouble with the endgrain painting, although it did soak in a lot. I just kept putting more on.

With regard to durability though, the main thing is to not get it wet. The paint helps with this, but if a night stand will be holding a cold glass during times of high humidity, it might soak through and cause problems.

Also, I have noticed that one beveled edge on the bottom of the MDF bookshelf has a crack in it. This probably occurred during our move last year, but I'm not sure a solid wood edge treatment would have had that problem.

Don't make anything too big. It gets heavy quick.

Re: MDF for Painted bedside tables

#8

Thanks for the feedback

Mark in Whitby

>Thanks for the feeback.

Keep it small and therfore as light as possible, protect against and try to avoid the dust inside, and seal the end grain to finish ...appreciate the info'

Thnx

Mark