Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Performax Conveyor Belt

Posts

Performax Conveyor Belt

#1

Performax Conveyor Belt

Joe Burke

>I've been needing to replace the conveyor belt on my old Performax for while now, and today it broke and made my decision for me. It's at least 10 years old and between the search for a part number and it costing over $100 bucks ... well, you'd think I was buying government secrets.

The conveyor seems to be nothing more than a sanding belt. So, I ask myself, couldn't I just get a belt made to the appropriate size and try that. According to WWS a silicon carbide belt of the appropriate size would be ... maybe $40 bucks including shipping.

What am I missing? I'm sure there's some double secret reason some other belt won't work .... but what is it?

Re: Performax Conveyor Belt

#2

Who How Much??

Mark Mandell - Gone Round In Jersey

>My 22-44's conveyor belt is getting a bit stretched at the joint. As I don't feel like paying $300+ for the nifty rubber belt, I'm in line for a new abrasive belt.

Who you getting the quote from?

mm

Re: Performax Conveyor Belt

#3

I have the answer !!

Joe Burke

>It pays to be the cheapest man alive.

I called Woodowrker's Supply, as I have a very good relationship with them, and ran it by my salesman. He gave me the number for A&H Abrasives that WWS is affiliated with. I called them and got a very nice lady on the phone that immediately knew what I was talking about. It seems they do this sort of thing often.

My belt was a 120 grit at 23 x 62. I bought 3 ... for the discount ... and got my usual business break from WWS ... and all three belts including shipping and tax won't break $100. With three belts I can simply reload when the next one lets go.

One belt from the ditributor was going to be $105.

That just ain't right. She speculated that they might pay a lot for them. I speculate that they see you coming. They've got it ... you need it ... you're not likely to do what I did ... so you pay.

Again ... that ain't right.

Re: Performax Conveyor Belt

#4

Re: Performax Conveyor Belt

Barry Irby

>Mine wore out on my 16/32 and I replaced it. It was about fifty bucks at Woodcraft. If it had been much more I would have done what you did, or t least tried.

Mine wears when I sand very thin stock. Apparently the drum brushes the belt and sands the grit off.

I hope you did the right thing buying three. My first one lasted about ten years (IT was used and pretty ragged when I bought the machine 2nd hand)and the second one is about four years old. It is my understanding that sanding belts age just sitting around and it makes them prone to fail at the joints, so it may not be something you can store for a long time. Let us know and let us know how well it works.

Re: Performax Conveyor Belt

#5

Hint

Mark Mandell - Gone Round In Jersey

>Barry,

I was told to take some of the tension off the belt if it's going to sit idle for a while. My conveyor is almost 10 years old, and is only now showing its age. I take 4 turns on each side off my belt tensioners when I put the machine away. Seems to have helped.

mm

Re: Performax Conveyor Belt

#6

Okay .... Rain on My Parade ...

Joe Burke

>They may indeed degrade if left to sit about. I suppose I'll find out. I need one immediately, so maybe I'll be okay. Honestly, I liked the deal, but I also hedged some against it not lasting. In case there is some mystical property the expensive one had. That sounds better than .... hmmmm ... didn't think of that ;-)

Mine was as old as the machine too, which had to be at least 10 years. It was used and abused and never loosened. I thought I was the only one that allowed the drum to hit the conveyor from time to time. My DC will suck the conveyor into the drum ... which was probably a sign it needed tightening. Truth be told, I'd have been well served to have replaced it two years ago. Maybe with the extras I'll pull the trigger sooner.

Re: Performax Conveyor Belt

#7

Re: Okay .... Rain on My Parade ...

Barry Irby

>Actually, I went to a local manufacturer of sanding belts and bought what may be a lifetime supply of 4X24 sanding belts for my portable belt sander. They are about five years old now. One broke the other day and I had that sneaking little suspicion I had made the mistake of over stocking. On the other hand, I have others that may be ten or fifteen years old. If they start bursting regularly, I guess I will have leaned something.

It might have been a good idea to get together with a couple of other performax owners and buy about two piece. Short of that, I think you are good to go. I have never released the tracking tension on mine. Rats, something else to obsess about.

Re: Performax Conveyor Belt

#8

Re: Okay .... Rain on My Parade ...

Joe Burke

>I decided over dinner that I'd establish a Performax conveyor belt rotation schedule to keep all three healthy.

Why do I doubt myself??

Re: Performax Conveyor Belt

#9

Stories like this make you wonder why the Jet/

Art Silva

>Performax 16-32 belt is twice the price of the Delta 18-36 belt.