Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Is anybody using a Worksharp on lathe tools?

Posts

Is anybody using a Worksharp on lathe tools?

#1

Is anybody using a Worksharp on lathe tools?

Mark in B'ham, AL

>I tried posting this on the Tuning forum but there wasn't much response. I just got a WS3000 and have tried using the slotted wheel for my gouges. I am only using the course grit that came with it. I was wondering if others were using it and if they had gotten more wheels to progress through grits. Also, I was wondering if anyone had found a way to maintain the bevel angle on the slotted wheel or if, like me, y'all were doing it freehand?

Re: Is anybody using a Worksharp on lathe tools?

#2

Re: Is anybody using a Worksharp on lathe tools?

Ron Hildreth

>Mark,

I bought several more wheels and grits, and freehand sharpen all my lathe tools. Takes a little practice, but still easier than anything else I've tried.

Ron in Iowa

Re: Is anybody using a Worksharp on lathe tools?

#3

Re: Is anybody using a Worksharp on lathe tools?

Doug Ridley

>I used it freehand. Worked great for me too.

Re: Is anybody using a Worksharp on lathe tools?

#4

I am

Michael Dresdner

>I love it. I use two different grits on two slotted wheels and freehand, but it is so easy to see exactly what you are doing that no guides are needed. For touchups, I run a black sharpie along the tip to make it easier to know when to quit, and touch up only on the fine wheel. I adore that tool!