Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

shop floor?

Posts

shop floor?

#1

shop floor?

Ernie Miller

>I was reading the dispute advice on Wood Central. it got me to thinking? that can't be good. any way I have rubber horse stall mats running wall to wall in my shop 3/4" rubber mats I put them in up side down so they are flat. any way I have been thinking about installing some of the floating floor over top of them for looks and ease of cleaning. but fear it may not hold up to the ocasional dropped chisel or project. is there a way to glue hard wood flooring together and let it float like them ingeneered floors? My shop is in a basement and the rubber sits on top of that so nailing will not work. any ideas on this? just being differant In KS Ernie Miller

Re: shop floor?

#2

Re: shop floor?

Clint Searl, at the base of Haycock Mtn

>A durable, easy to install, and less expensive alternative is 3/" T&G Advantec OSB decking/sub-floor. Joints can be glued to eliminate need for nailing. 1x3 strapping could be screwed around the perimeter to really hold it together. I put it in my shop and painted it with porch and floor paint. I love it.

Clint

Re: shop floor?

#3

Re: shop floor?

Ernie Miller

>I like the idea of the 3" border for ancoring it. I wonder if I were to run a strip every 4' between the mats if that would be enough to nail a floor in place if it were glued? we have a factory not far frm her that makes flooring and can get rejects really cheap that would make a nice shop floor for a guy like me. might look into the OSB stuff?

Re: shop floor?

#4

Re: shop floor?

phil in NJ

>I saw at Home Depot at one point a stack of 2' x 2' chipboard T&G squares with a PVC bottom layer in a waffle pattern. The idea is the PVC sits on the slab, and provides a vapor barrier of sorts and keeps the floor off the slab.

The loading characteristics were pretty good. You might be able to nail a standard floor ontop of that....

Re: shop floor?

#5

Re: shop floor?

Ernie Miller

>Not concerned about moisture in the floor and I havd 3/4" fatigue mats covering the entire area I want to install wood over that to make it easier to clean and look nicer. the black floor is unapealing

Re: shop floor?

#6

3/" really means 3/4"

Clint Searl, at the base of Haycock Mtn

>