Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

OT 19 hours and ~20 minutes and one aw

Posts

OT 19 hours and ~20 minutes and one aw

#1

OT 19 hours and ~20 minutes and one aw

Dustmaker Mike

>Poop. I hate when this happens. I recorded ~9 hours worth of training classes to share with the other instructors that will be taken over teaching for me. I then take the tapes and record them to a Hard Drive which takes a little longer so I am thinking I spent 10 hours doing this. Today I place the hard drive (now with all the information on it) on my desk to copy it (you know make a back up) and someone walks by with a coat hanging over their arm and knocks it off to the floor. As I watched it bounce ever so slowly I saw all the time and effort I had put in it go to Poop. I pick it up they say they are sorry, I connect it to my computer and it does not work. I try to use the MFG recover disk and it still did not work. The test just says it had a hard shock and need to be replaced. SO 19 hours and ~20 minutes gone in the blink of an eye.

Re: OT 19 hours and ~20 minutes and one aw

#2

Ouch!

Mark Goodall - ATL - tooljunkie

>You cam email me if you need help. I've been able to recover files in situations like that.

If I can do it, it costs between $100-$500 depending on how complicated it is. It's usually between $100-$200. If I can't do it, which is rare) then I have the option of sending it to a clean-lab that specializes in this, but they start at $900 and can cost up to $5000.

Worst case was $4500. But that only happened once.

Happy Woodworking!

Re: OT 19 hours and ~20 minutes and one aw

#3

That's a bummer....

Eddie Pacheco; San Jose, Ca.

>I worked at IBM on disk drives and stuff like that used to happen. Laptop drives have a little plastic ramp,at OD of disk, in them that lifts the heads off the platter in the event of a drop. Desktop drives have a laser textured landing zone, on the disk, so they are not protected in the event of a drop.

Hey, we accidentally discovered head to disk "stiction". One morning when we powered up a bank of Winchester drives (way back in time), that had been sitting in an environmental chamber, after a brief but load racket all of the heads had been ripped off their suspensions. The mirror flat surface of the heads had wrung themselves to the mirror flat surface of the disks during a cold humid condition. This led to load/unload schemes, textured landing zones, and the little ramps.

There, now don't you feel better now that you have all of this after the fact useless info?

I hope the rest of the day and weekend goes way better for you.

Re: OT 19 hours and ~20 minutes and one aw

#4

Re: Call the mfg help line

Brian in Brighton

>They might have a way to reset the shock sensor and you can then give it another try. It might involve something silly like shorting out 2 of the pins in the connector or something. I would be surprised if they don't have a reset of some sort.

Brian in Brighton.

Re: OT 19 hours and ~20 minutes and one aw

#5

Thanks Guys

Dustmaker Mike

>I just did all the testing I could do. I replaced the drive and the next time I record the sessions I am getting enough tapes to hold the session and keep them safe while record them. This just makes me have the teach the course one more time so we can record it.