General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Stuart Johnson 7/24/10, 4:20 PM
9 Replies · 32 ViewsLast post 7/26/10, 3:51 PM by Bill Howatt -
by David Barnett 7/26/10, 2:41 AM
4 Replies · 26 ViewsLast post 7/26/10, 12:12 PM by wilbur -
How to lay out segment of 10' circle?
by Bill Tindall, E.TN. 7/24/10, 10:33 PM
20 Replies · 24 ViewsLast post 7/26/10, 11:31 AM by Bill Tindall, E.TN. -
by Charles Jackson III 7/25/10, 7:30 PM
3 Replies · 26 ViewsLast post 7/26/10, 1:59 AM by John Veerkamp -
by Doug Reynolds in Seattle 7/23/10, 9:24 PM
5 Replies · 27 ViewsLast post 7/25/10, 6:12 PM by Doug Reynolds in Seattle -
Delta Unisaw 34-801 Mobile Base Exict??
by Vincent 7/25/10, 1:30 AM
2 Replies · 103 ViewsLast post 7/25/10, 5:14 PM by Jeffrey Schnell -
Silly pencil sharpening service
by Rick L 7/23/10, 6:08 PM
9 Replies · 20 ViewsLast post 7/25/10, 3:30 PM by Bill Houghton -
by Thomas Norton 7/24/10, 1:02 PM
2 Replies · 16 ViewsLast post 7/25/10, 1:20 PM by Dave Paine -
by Ken Oakley-Sunny St. Cloud, Fla 7/24/10, 2:51 PM
9 Replies · 39 ViewsLast post 7/25/10, 8:51 AM by Ken Oakley-Sunny St. Cloud, Fla -
by Doug Ridley 7/23/10, 9:54 PM
6 Replies · 25 ViewsLast post 7/25/10, 12:08 AM by steve mackay -
Replacement bearing for router bit??
by Barry Irby 7/24/10, 3:26 AM
12 Replies · 20 ViewsLast post 7/24/10, 8:51 PM by Phil Joines -
Basement floor concrete sealer
by Gary Smyth 7/23/10, 9:46 PM
5 Replies · 26 ViewsLast post 7/24/10, 6:07 PM by Bill Tindall, E.TN. -
I continue to look for this hinge
by Gary Smyth 7/23/10, 6:02 PM
6 Replies · 15 ViewsLast post 7/24/10, 1:36 PM by Gary Smyth -
Optimum size and how to cut corner shelf?
by Thomas 7/21/10, 10:25 PM
9 Replies · 49 ViewsLast post 7/24/10, 3:06 AM by Thomas -
OT Any ex-Ma Bell Techs Out There?
by Steve in Phoenix 7/23/10, 2:54 PM
2 Replies · 28 ViewsLast post 7/23/10, 8:30 PM by Steve in Phoenix -
by Jerry Gibbs 7/23/10, 1:05 PM
4 Replies · 12 ViewsLast post 7/23/10, 6:51 PM by Tony - Memphis -
Random thoughts on woodworking future..
by Alan Young 7/21/10, 1:55 PM
24 Replies · 91 ViewsLast post 7/23/10, 6:30 PM by glh17 -
by bugbear 7/23/10, 8:02 AM
1 Reply · 43 ViewsLast post 7/23/10, 4:35 PM by Bill Houghton -
by Gary Smyth 7/22/10, 8:05 PM
6 Replies · 18 ViewsLast post 7/23/10, 11:31 AM by Gary Smyth -
Festool sliding miter vs others
by John Lucas 7/21/10, 8:59 PM
10 Replies · 78 ViewsLast post 7/23/10, 10:40 AM by Carl Barton -
WC Weekend Accomplishments....
by Dennis E Peacock 7/19/10, 1:05 PM
11 Replies · 34 ViewsLast post 7/23/10, 1:56 AM by Tom Dunlap -
by Barry Irby 7/21/10, 1:13 AM
7 Replies · 50 ViewsLast post 7/22/10, 6:38 PM by Barry Irby -
by barry 7/19/10, 1:37 PM
9 Replies · 63 ViewsLast post 7/22/10, 5:19 PM by Moses Yoder -
by Dustmaker Mike 7/21/10, 11:52 AM
8 Replies · 24 ViewsLast post 7/22/10, 4:10 AM by Tom Dunlap -
by Dave Paine 7/21/10, 1:34 PM
3 Replies · 25 ViewsLast post 7/21/10, 7:51 PM by FredD -
by Dustmaker Mike 7/21/10, 1:19 AM
5 Replies · 32 ViewsLast post 7/21/10, 4:25 PM by Jim DeLaney, Austintown, Ohio -
by Stephen Kirk 7/21/10, 12:14 PM
1 Reply · 25 ViewsLast post 7/21/10, 4:07 PM by Gary Smyth -
by Don Orr 7/16/10, 4:21 PM
22 Replies · 38 ViewsLast post 7/21/10, 2:16 PM by Keith Newton----Little Rock, Arkansas -
Help with Fein Dustex/Turbo 25
by Derek Cohen (in Perth, Australia) 7/21/10, 1:55 PM
1 Reply · 18 ViewsLast post 7/21/10, 2:14 PM by Dave Paine -
by Thomas S Stockton 7/20/10, 4:03 AM
15 Replies · 39 ViewsLast post 7/21/10, 10:54 AM by Dave MacLuskie



