Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

OT-Marble or Granite Tabletop

Posts

OT-Marble or Granite Tabletop

#1

OT-Marble or Granite Tabletop

Ken Oakley-Sunny St. Cloud, Fla

My wife has an antique small Monks Stool which is like a small round table. It had a granite or marble top which was about 18" in dia X 1" thick. Yesterday the stool was knocked over and the top shattered into pieces. I am trying to locate someplace that I could get a replacement for the top.

I live near Orlando but would order on line if needed. Anybody have or know of a source. TIA

Re: OT-Marble or Granite Tabletop

#2

Re: OT-Marble or Granite Tabletop

Barry Irby

Check locally for a Granite counter top supplier. They provide tops to the kitchen cabinet/ kitchen remodel industry. The variety of stone they have now is huge. I can't remember what diameter round sinks are, but they may be able to take a cutout and edge it for you. Even if that does not work, they will surly have cutoff and small pieces they can cut to size for you. I have no idea what this will cost you, but I suggest you carry your big wallet and a stool to sit on when they give you the price. It will be with next to nothing or more than you thought.

Re: OT-Marble or Granite Tabletop

#3

Re: OT-Marble or Granite Tabletop

Doug Ridley

Go to an antioue shop and find a piece of marble large enough and cut it yourself. It's easy. Use a masonry blade in your skill saw and cut small segments close to the line and finish making it round on a disc sander. I have done it several times. It is pretty dusty so I suggest doing as much as possible outside.

Re: OT-Marble or Granite Tabletop

#4

Re: OT-Marble or Granite Tabletop

George Colonel's Workshop-Havertown PA

Hello Ken,

That may not be such a grave problem to a supplier of cemetery monuments/headstones. They deal in those materials a lot, and could probably dig up a good source for you. 8)

George

Re: OT-Marble or Granite Tabletop

#5

I Agree

George Colonel's Workshop-Havertown PA

Good Morning Ken,

SWMBO just got herself a new kitchen and selected granite from a local supplier. We had to buy a whole slab, but he gave us the off cuts, shaped as we wanted them. One offcut was for a lazy susan, about the dimension you need. The largest became the kitchen table top which matches her counters. It may not cost you an arm and a leg to do as Barry suggests, and you are sure to have a variety of colors/textures from which to choose.

George

Re: OT-Marble or Granite Tabletop

#6

Re: I Agree

Doug Ridley

Here's one I did myself. Very easy.

Re: OT-Marble or Granite Tabletop

#7

That's Pretty Doug.  Nice job

George@Colonel's Workshop-Havertown PA

Re: OT-Marble or Granite Tabletop

#8

Re: OT-Marble or Granite Tabletop

paul in AZ

In the last couple of weeks i finished redoing two bathrooms that included granite countertops so I looked at a lot of stone in slab suppliers and at fabricators.

I couldn't make it work for my large surfaces [one 8 feet long] but for a small piece of stone I'd suggest calling local granite/marble fabricators. They have 'boneyards' of slab pieces left over from other jobs and can cut one for you at what is usually a great price. These left overs are from jobs where someone else had already paid for an entire slab. You basically pay for not much more than the fabrication cost. Around here the selection in the bone yards can be remarkably good, and is often unusual stone from level 3, 4 or 'exotic' price ranges. Much of the stone in the kitchen-type stores or Home Depot are pretty ordinary stone and not at all cheap.

Look 'em up under 'granite fabricators'.

Re: OT-Marble or Granite Tabletop

#9

In this economy, they'd be glad of the work...

John in NM

I hear things are really dead right now :D