Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

A quicker/easier way

Posts

A quicker/easier way

#1

A quicker/easier way

barry

Just looking for some comments on an idea I have. I am making several dozen of a particular item and am applying an oil finish with a cotton rag. It is taking forever and am thinking about an easier/quicker way. What if I just dip the items in a container of motor oil ? It's obviously not made to finish wood products but it sure would be quick and easy.

Any thoughts?

Re: A quicker/easier way

#2

Might work

Mark Mandell - Gone Round In Jersey

if you need to lubricate those whatevertheyares.

Re: A quicker/easier way

#3

Re: A quicker/easier way

Ralph Lipeles

Since motor oil does not cure or set it will feel oily forever and may seep oil when the temperature goes up.

Re: A quicker/easier way

#4

Requires  a change every 3000 Miles

Ron Bauman

Re: A quicker/easier way

#5

Kind of Like the Gulf of Mexico

Mark Mandell - Gone Round In Jersey

Re: A quicker/easier way

#6

Re: A quicker/easier way

Bill Tindall

It is not uncommon down of the farm where EPA isn't looking to use diesel motor oil for a barn finish. Lasts a surprisingly long time and looks, well, black. When I was a kid I remember finishing cedar shingles with motor oil and burnt umber pigment.

Re: A quicker/easier way

#7

Motor oil ? . . .

steve mackay

I'm wondering what the "item" will be used for. If it were fence posts I could see it. It would keep weeds and grass from growing around them. If it were anything that would be in the house or if anyone would be handling it, its going to be messy forever more.

Re: A quicker/easier way

#8

Moses Yoder

Re: A quicker/easier way

Moses Yoder

If you mix turpentine and fast dry poly finish with the oil (one third of each) it will build faster and dry to a more durable finish. There would not be any problems with putting it in a bowl and dipping the entire object then just wiping the finish off. In the summer because of higher humidity it can take 3 days to dry though.

Re: A quicker/easier way

#9

Re: quicker anyway

Mark Mandell - Gone Round In Jersey

Spray Lacquer. Even spray Deft will get you there in a day with 4 or 5 applications.

Re: A quicker/easier way

#10

Moses Yoder

Re: quicker anyway

Moses Yoder

Spray laquer is the worst finish I know of. It does not look nice, does not last more than 5 years or so, especially if you set a glass on it, will leave a water ring, and it does not stand up to sunlight very well at all. It will crack if you look at it too hard. But it is faster than an oil finish.