General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by skirincich 2/20/12, 3:56 AM
3 Replies · 11 ViewsLast post 2/20/12, 5:46 PM by Gary Smyth -
by Marty 2/18/12, 3:59 PM
6 Replies · 30 ViewsLast post 2/20/12, 5:38 PM by Andy Lincoln -
Charging lithium ion batteries
by Gary Evans 2/17/12, 2:22 AM
6 Replies · 25 ViewsLast post 2/20/12, 1:18 PM by Gary Evans -
Exercise for your mind. *LINK*
by Keith Newton 2/19/12, 2:56 AM
2 Replies · 18 ViewsLast post 2/19/12, 6:03 PM by Keith Newton -
DIY tip for sander with vac / hose
by Keith Newton 2/18/12, 4:27 PM
8 Replies · 44 ViewsLast post 2/19/12, 4:31 PM by Charlie Lenz -
Good place for wood working Tools -parts ect.
by del schisler 2/17/12, 6:28 PM
4 Replies · 22 ViewsLast post 2/19/12, 1:33 PM by del schisler -
by David Frame 2/19/12, 3:11 AM
2 Replies · 22 ViewsLast post 2/19/12, 4:55 AM by Jesse Cloud -
Looking for a finishing protocol
by Alan Young 2/17/12, 2:19 PM
14 Replies · 57 ViewsLast post 2/18/12, 4:37 PM by Leo Cuellar -
by Brian in SLO 2/16/12, 9:50 PM
8 Replies · 21 ViewsLast post 2/17/12, 6:48 PM by Charlie Lenz -
OT - sources for metal wall ladder?
by JL 2/16/12, 9:12 PM
1 Reply · 15 ViewsLast post 2/17/12, 6:22 PM by John E. in SC -
by Jack Guzman from Maine 2/15/12, 5:18 PM
7 Replies · 51 ViewsLast post 2/17/12, 4:25 PM by Jack Guzman from Maine -
by Edward McCormack 2/17/12, 3:00 AM
6 Replies · 283 ViewsLast post 2/17/12, 3:18 PM by Jesse Cloud -
general purpose/resaw blade for 14" bandsaw
by Adrian 2/7/12, 10:50 PM
13 Replies · 41 ViewsLast post 2/17/12, 2:37 PM by Adrian -
by Hal 2/16/12, 5:21 PM
1 Reply · 13 ViewsLast post 2/17/12, 12:50 PM by Dave Nichols -
by Dale Lenz 2/15/12, 10:00 PM
6 Replies · 32 ViewsLast post 2/17/12, 12:32 PM by Dale Lenz -
What is "nested-based manufacturing"?
by Bill Tindall, E.TN. 2/15/12, 10:41 PM
7 Replies · 65 ViewsLast post 2/17/12, 4:01 AM by Charlie Lenz -
by Moses Yoder 2/16/12, 7:16 PM
11 Replies · 62 ViewsLast post 2/17/12, 12:04 AM by C. Pearson -
by Keith Newton 2/15/12, 12:54 AM
7 Replies · 60 ViewsLast post 2/16/12, 10:46 PM by Keith Newton -
Thought I had an "Oh, c$#(" moment...
by JL 2/15/12, 10:00 PM
4 Replies · 46 ViewsLast post 2/16/12, 9:24 PM by Paul Blackwell -
The physics of resawing *LINK*
by Dick Coers 2/15/12, 5:57 PM
11 Replies · 41 ViewsLast post 2/16/12, 6:25 PM by Bill White -
OT: 4 Barry Irby home inspection ?'s
by Carol Reed, Pahrump, NV 2/16/12, 2:33 AM
12 Replies · 27 ViewsLast post 2/16/12, 5:36 PM by Carol Reed, Pahrump, NV -
by Thad Parker 2/15/12, 10:19 PM
9 Replies · 27 ViewsLast post 2/16/12, 4:22 PM by larry in nw ohio -
Waaayy OT-It's Official! *LINK*
by Don Orr 2/15/12, 1:51 AM
4 Replies · 15 ViewsLast post 2/16/12, 2:46 PM by Don Orr -
by Dave in Bryn Mawr PA 2/15/12, 8:22 PM
6 Replies · 20 ViewsLast post 2/16/12, 2:32 PM by john lucas -
by Dustmaker Mike 2/16/12, 1:20 AM
1 Reply · 13 ViewsLast post 2/16/12, 3:26 AM by Ellis Walentine -
by Jerry Gibbs 2/15/12, 8:48 PM
1 Reply · 10 ViewsLast post 2/15/12, 11:15 PM by larry in nw ohio -
by Tom Rex in TX 2/15/12, 4:32 PM
3 Replies · 24 ViewsLast post 2/15/12, 9:09 PM by Gary Smyth -
by Alan Young 2/14/12, 5:57 PM
14 Replies · 37 ViewsLast post 2/15/12, 6:35 PM by Alan Young -
help fixing a 12" Robland J/P cutterhead problem
by Geoff (in Madison) 2/12/12, 6:12 PM
5 Replies · 22 ViewsLast post 2/15/12, 6:10 PM by Geoff (in Madison) -
by Allen Bryant - Bumpass, VA 2/14/12, 7:07 PM
10 Replies · 45 ViewsLast post 2/15/12, 5:10 PM by Charlie Lenz



