Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Charging lithium ion batteries

Posts

Charging lithium ion batteries

#1

Charging lithium ion batteries

Gary Evans

Hi all,

After one of the original ni-cad batteries for my Ryobi 18V tools melted on the charger, I decided to bite the bullet and bought the newer lithium ion batteries for them. I have been using the two batteries extensively, one each in the drill and the impact driver and so far neither of them has noticeably run down. I need to use them this weekend far from any electrical source and I want to make sure they are fully charged so that I can complete the job that needs doing before I come home.

Is it going to hurt anything to put them on the charger in a partially discharged state, or do I need to run them on down some?

Gary

Re: Charging lithium ion batteries

#2

Jesper, Denmark

Re: Charging lithium ion batteries

Jesper, Denmark

You can charge them in any state they happen to be in. No problem.

Re: Charging lithium ion batteries

#3

Re: Charging lithium ion batteries

Bill Tindall

Li ion batteries can be charged from any state. In fact they will last longer if you don't run them to their end.

Li ion batteries are different in another regard. They are ruined if totally discharged. Hence, the battery has internal battery management electronics to prevent too much charge (which will result in smoke and fire), or too much discharge. The electronics just shuts the battery down when it denses too low a voltage.

You don't have to run NiCd down before recharge if you have a high quality charger.

Re: Charging lithium ion batteries

#4

Re: Charging lithium ion batteries

Jason Waters

I assume you will be driving there? Ryobi does make a car charger now for the Lithium Ion batteries now (before it only worked with the old ones) which may help your issue. It's about $40 at Home Depot.

Otherwise, top off the charge before you head out. Borrow some extra batteries if you can.

Lastly, Take the bit and brace in case the batteries fail. It won't run out of juice unless you do.......

Jason

Re: Charging lithium ion batteries

#5

Re: Charging lithium ion batteries

Gary Evans

Thanks guys,

Turns out the batteries were plenty sufficient to the task after a full charge.

I'm glad to know that business about the battery just cutting out when it gets low. It means I bought the new impact driver for no good reason. I thought maybe I'd let the smoke out of my old one and just hadn't seen it. I like the new one, though. 30% more torque.

Gary

Re: Charging lithium ion batteries

#6

Re: Charging Lithium Ion - CAUTION!

David C. Lykins

Just curious as to whether or not the original charger is designed to charge Lithium type batteries. I know from experience that in the field of Remote Control Modeling you MUST CHARGE your Lithium Ion and Lithium Polymer batteries with a charger specifically designed for charging those type of batteries. Failure to do so will either not charge the individual battery cell properly (i.e. not balance charge them) or it may over charge them and create a fire. You might want to check into that.

Just a thought........

Re: Charging lithium ion batteries

#7

Re: Charging Lithium Ion - CAUTION!

Gary Evans

No problem David.

When I bought the first L-I battery, I got it with the charger. Then I bought a second, larger capacity battery to go with it.

I have used both batteries extensively over the past week or so. I'm extremely pleased with their performance.

Gary