Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Signing your work

Posts

Signing your work

#1

Signing your work

Allen Bryant - Bumpass, VA

Last night my dad was telling me this story. He was helping his friend move into a new apartment and had to partially disassemble a dresser in order to get it in the doorway, when they did, they noticed behind one of the drawers in the frame the person that made the dresser had signed, dated and recessed a penny from the same year (1927) into the frame. That got me wondering who else signs or marks their work so they know when and who made it. I believe one of our goals as woodworkers is to make items that will last for generations and this is a neat way to document when something was made.

Re: Signing your work

#2

Re: Signing your work

Joseph Mulherin

There is a website which produces inlays made for people to sign their work for posterity:

www.working widget.com

Re: Signing your work

#3

Ellis Walentine

Here's how I do it

Ellis Walentine

Maker's marks are a time-honored vanity that craftspeople in all disciplines employ. Whether or not it enhances value, I don't know, but it at least established authenticity (if that's important). For many years, I inlaid a tiny ivory rosebud into furniture and architectural pieces that I designed and built.


For turnings, I used to draw a rosebud on the bottom of the piece, with the month and year abbreviated under it. Later, I had a custom branding iron made that I can mount in a chuck in the tailstock. The brand was made by our friend Rick Herget, of Quality Engraving, LLC, a WoodCentral advertiser.


Ellis

Re: Signing your work

#4

I sign my work

Lee Schierer McKean, PA

I have a branding iron with my name on it and I embed a penny of the current year using a 3/4" forstner bit before I apply the finish to all the pieces I make. I've done this for years, but it is hard to find current year pennies March or April sometimes. I usually place the brand in and out of the way location or on the back.

Lee

Re: Signing your work

#5

Dale Lenz

But....Ellis

Dale Lenz

in the year 2525 assuming man is still alive. How is "Sara" going to know which century 06 was in? Just saying...

Re: Signing your work

#6

Re: I sign my work

Alan in Little Washington (NC)

I planned to get a branding iron, but because of price and indecision over the design, I ordered a much less expensive rubber stamp and permanent ink. I still haven't decided on a branding iron design so continue to use the rubber stamp.


Re: Signing your work

#7

That must have been common back then.

Keith Newton

I spent most of a year working on a house recently which was built that year, and there was a penny in the front porch concrete, so I suspect there must have been an article published in Time or Post stating the importance of future documentation around then.

In my early years, I would pencil in my name and date on the bottom of drawers or somewhere out of sight. But in the year of 1980, I made a few pieces for myself, which was of Japanese influence, and signed them with a cuneiform style, which resembled conji, and became my logo. After that, I started signing my work somewhere visible from the outside.

Now, If I design and make something, and fail to sign it, I will usually get a call to come do it. I don't sign everything I touch,,, only the work which I design, and feel significant to deserve it.

I just signed the current project, and even included my helper, for the first time. He had a big part in the development of this piece, and should be given credit for that. He had to leave before it was finished, I did it for him. I emailed him a pic, along with a note, good news, bad news. The good is that his name is on it. The bad, is that most people pay more than he makes in a week to have a logo designed that good. ha.

As for date, I use the date as a tracking number, if it is something going to a gallery or show with a number of other works.

Re: Signing your work

#8

Bob

Re: That must have been common back then.

Bob

Keith,

Can you post a picture of your latest signing? I'd like to see what it looks like as it sounds interesting.

Thanks

Bob

Re: Signing your work

#9

Re: Signing your work

Howard In Toronto

In an unobtrusive spot, I put my thumb into the drying finish to show that it was made by hand and on the back I sign and date it with a Sharpie.

Re: Signing your work

#10

Gandalf . . .

steve mackay

I highjacked Gandalf's "elven G" mark. That goes on top. I also cut a "window" in the felted bottoms of my bases for a card with date, signiture and serial number. I know it's silly but I have this fanttasy the it'll turn up on Antiques Roadshow one day. "Oh my God Sir, you've got a Mackay Original ! Its PRICELESS !"

Re: Signing your work

#11

Re: I made a branding iron

Charlie Lenz

Using my initials I crafted up a branding iron.