Abrasive life expectancy.
Keith Newton
Still trying to get accustom to my new Bosch sander. One thing that I like and yet don't like, is that it does a fine job of collecting the dust, but without seeing the dust flying away, I suspect I will be wasting time burnishing with a worn out disk.
Have any of you done any test, or know of any charts which show the time relative to wood type or density, for given abrasives? I can't claim that sanding is one of my favorite parts of woodworking, so I really don't want to be wasting time going through the motions, now that I have lost that visual cue.
Also, I paired it with a little 4 gallon Rigid WD 4070 shop-vac, wired into a switch which turns it on whenever I start the sander. But I had to adapt the hose with an old one from another older small one, which is falling off regularly. Have any of you dealt with the hoses and found the best? This one seems too stiff, and probably a bit smaller than it should be.
I am kinda thinking I could rig a over-arm, spring loaded lift, that would take a lot of the weight off the first few feet of hose. It might include an old fishing rod worked into the equation. he he, No more fish than I normally bring home, I ought to find a better use for them.



