Hand Tools
Traditional tools, sharpening, restoration, usage techniques.
Related: Hand Tools archive
Topic list
-
TopicStatisticsLast post
-
by Sgian Dubh 8/1/09, 7:48 AM
9 Replies · 45 ViewsLast post 8/3/09, 6:58 PM by Sgian Dubh -
by Joe Shelton 8/3/09, 1:12 AM
7 Replies · 75 ViewsLast post 8/3/09, 5:15 PM by Pam Niedermayer, Austin, TX -
by Bill Tindall, E.TN. 7/5/09, 8:47 PM
13 Replies · 71 ViewsLast post 8/3/09, 1:15 PM by Bill Tindall, E.TN -
by Bill Tindall, E.TN. 7/31/09, 1:55 PM
8 Replies · 22 ViewsLast post 8/2/09, 11:51 PM by Scott Burr in Ben Lomond CA -
Made this timber mallet today. (a.k.a."persuader")
by Alan DuBoff 8/2/09, 4:17 AM
3 Replies · 33 ViewsLast post 8/2/09, 11:16 PM by Bill Houghton -
After 3000 years or so they finally... *LINK*
by Stephen Shepherd in the State of Deseret 7/31/09, 12:18 PM
10 Replies · 24 ViewsLast post 8/2/09, 9:29 PM by Scott Burr in Ben Lomond CA -
by Sawman 8/2/09, 4:53 PM
1 Reply · 21 ViewsLast post 8/2/09, 5:02 PM by Derek Cohen (in Perth, Australia) -
by Gordon Thomas 7/13/09, 3:15 AM
9 Replies · 47 ViewsLast post 8/2/09, 2:58 PM by Pam Niedermayer, Austin, TX -
by Bruce, a MN Galoot 7/30/09, 6:34 AM
7 Replies · 54 ViewsLast post 8/2/09, 5:37 AM by Bruce, a MN Galoot -
by redcoat 8/1/09, 8:30 AM
3 Replies · 30 ViewsLast post 8/2/09, 1:39 AM by Alan DuBoff -
by Derek Cohen (in Perth, Australia) 7/27/09, 3:08 PM
9 Replies · 28 ViewsLast post 8/1/09, 10:05 PM by Scott Burr in Ben Lomond CA -
by Patrick Gibbons, Katy, TX 7/28/09, 1:19 PM
1 Reply · 24 ViewsLast post 7/30/09, 2:55 AM by Dave Thompson -
Special Guest - Tuesday Night Hand Tool Chat
by Stephen Shepherd in the State of Deseret 7/28/09, 11:50 AM
2 Replies · 21 ViewsLast post 7/29/09, 10:35 PM by Scott in Montana -
by Wiley Horne - S. CA 7/27/09, 4:39 AM
11 Replies · 31 ViewsLast post 7/29/09, 6:24 PM by Wiley Horne - S. CA -
hollow grind vs. face grind *LINK*
by DaleLenz 7/21/09, 12:14 AM
20 Replies · 50 ViewsLast post 7/29/09, 6:05 PM by Wiley Horne - S. CA -
Carbide blade scraper - turning a burr?
by Dave (Arlington, VA) 7/27/09, 11:43 PM
2 Replies · 32 ViewsLast post 7/29/09, 12:05 AM by Dave (Arlington, VA) -
What is the name of the stuff...
by Stephen Shepherd in the State of Deseret 7/25/09, 1:32 AM
11 Replies · 22 ViewsLast post 7/28/09, 7:21 AM by David Barnett - SW FL Gulf Coast -
Level type studies? Rambles a bit *LINK*
by Bill Houghton 7/26/09, 9:44 PM
1 Reply · 24 ViewsLast post 7/27/09, 4:20 PM by Bill Houghton -
by Stephen Shepherd in the State of Deseret 7/27/09, 12:14 PM
0 Replies · 27 ViewsLast post 7/27/09, 12:14 PM by Stephen Shepherd in the State of Deseret -
In case anyone should need a WW mag article 2
by Dan Mitchell 7/16/09, 7:01 PM
28 Replies · 186 ViewsLast post 7/26/09, 10:52 PM by Bruce, a MN Galoot -
Drum roll, please...We have a winner!
by Ellis Walentine 7/25/09, 8:23 AM
3 Replies · 30 ViewsLast post 7/26/09, 5:06 PM by Alan DuBoff -
by Dale Stansbery 7/26/09, 1:29 AM
1 Reply · 27 ViewsLast post 7/26/09, 4:53 AM by Gary Roberts -
Handle/knob selection for bowsaw
by Dominic in Buck's County PA 7/23/09, 1:10 AM
14 Replies · 31 ViewsLast post 7/26/09, 12:41 AM by Alan DuBoff -
by Gary Roberts 7/25/09, 3:48 AM
2 Replies · 62 ViewsLast post 7/25/09, 6:39 PM by Gary Roberts -
DIY Infill: Finished! *big PICs* *LINK* 2
by Craig D 7/19/09, 12:36 AM
29 Replies · 76 ViewsLast post 7/24/09, 11:49 PM by Todd Hughes -
Last Chance: THE IDES OF JULY *LINK*
by Ellis Walentine 7/24/09, 2:52 PM
0 Replies · 23 ViewsLast post 7/24/09, 2:52 PM by Ellis Walentine -
What's the purpose of this spokeshave? *LINK*
by Bill Houghton 7/21/09, 8:16 PM
4 Replies · 28 ViewsLast post 7/23/09, 5:39 PM by Alan DuBoff -
by David Yoho 7/20/09, 12:17 PM
1 Reply · 20 ViewsLast post 7/23/09, 2:57 PM by Bill Houghton -
Last Chance: THE IDES OF JULY *LINK*
by Ellis Walentine 7/21/09, 6:28 PM
0 Replies · 47 ViewsLast post 7/21/09, 6:28 PM by Ellis Walentine -
by Stephen Shepherd in the State of Deseret 7/21/09, 11:40 AM
0 Replies · 28 ViewsLast post 7/21/09, 11:40 AM by Stephen Shepherd in the State of Deseret



