Inspiring!
Tony - Memphis
>Wow, I've never really been that interested in building a plane, but that makes me think I'd like to. Can't view the lside show from work (our system thinks the web site is evil), but I'll check it out at home.
Tony
Knowledge You Can Build On — Est. 1998
Inspiring!
Tony - Memphis
>Wow, I've never really been that interested in building a plane, but that makes me think I'd like to. Can't view the lside show from work (our system thinks the web site is evil), but I'll check it out at home.
Tony
On second thought, I like what you've done...
Scott Burr in Ben Lomond CA
>In looking at it again, I agree with you. It looks better with the beveled metal. As far as the adjustable mouth, all I can is DUHHHHH!
As far as the set screws... So you stacked up the tolerances so much you didn't need them eh! 8^)
I think the lateral adjustment takes the slop out of a Stanley. Still I'm probably still missing somethin'.
Yes, The saws are a well fit family.
Thanks!
Show me the money! *PICS* *LINK*
Craig D
>You guys have been a great audience and haven't asked the hard questions, like "does it work?". Why, yes indeed it does and here is proof (walnut and purpleheart):
Craig
slide show
SWEET!
Scott Burr in Ben Lomond CA
>Nice money shot!
8^)
Very Common
Todd Hughes
>Scrap wrought iron like that is still very common even if it hasn't been made in many years. When I moved some years back I probably brought 500lbs of it with me and left another 500 lbs. behind at the old place because i didn't want to fool with it.
There is something that is being made now that the sellers call something like "Real Wtought Iron" that I saw being sold at blacksmith shows. That which i saw differed from the old wrought iron in that it didn't have a grain to it. Friends that have used it said it forge welds like wrought iron.
Wrought iron was used alot for bridges and buildings and some of people that sell it at shows got thier stock from these places. For me the problem was finding it in the right size and of the right quality.
I used it mainly for making small axes so i sure didn't want to fool with a piece of scrap iron 1 inch thick and 6 inch wide. I used lots of old buggy tires which were about the right size [about 1/4 X 2 inch] I used to buy these tires for $5 or less and could get alot of axes out of each one
Another thing is not all wrought iron is the same, lots of old fences made out of wrought iron but very low grade which makes it hard to use. Will split up on you as you forge it, can go ahead and forge weld it up some but more work and not a sure thing...Not worth your time to mess with junk.
I used to buy these old stove pokers about 3/4 inch and 3-5 feet long. Good raw stock for many projects.I once bought one for $3 and my friend with me got on me for spending $3 for a rusty iron rod. I told her you see a rusty iron rod me I see 3 $1,500 slave collars!
I used wrought iron because it was the traditional material used for what I was making. A person that knows what he is about can look at something that is made out of wrought iron and spot it right off esp. if not real high grade iron.
...Today people give it magical hoodoo qualities...Well you can believe that if you want to but I don't and folks I have made 100s of tools out of it! Believe me a solid steel tool will work just the same.
It was used tradtionaly to save on cost by allowing the smith to use less of the expensive steel. Many smiths find it easier to weld then steel and probably is but a good smith can weld steel just as well. Wrought iron you do weld at a higher temperture then steel, if you got steel that hot it would burn. Is also much softer when you work it, I could tell with one hammer blow if it was wrought iron or steel. Also have to work iron at a higher temperture or that it will crack up on you, this can be hard to do for a smith that is used to working steel because he has trained himself not to get his work that hot....Well probably more then you wanted to know, eh?...Todd